BOOT141414 – UNINSULATED BOOT
$40.81Uninsulated galvanized register boot, 14×14 opening with 14″ round duct connection. Solid galvanized steel for unconditioned spaces or commercial high-airflow applications.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
Showing 529–576 of 1291 results
-
-
BOOT1468 – INSULATED REGISTER BOOT (14X6-8)
$25.27Insulated galvanized register boot, 14×6 opening with 8″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.
-
BOOT1489 – INSULATED REGISTER BOOT (14X8-9)
$26.29Insulated galvanized register boot, 14×8 opening with 9″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.
-
BOOT845 – INSULATED REGISTER BOOT (8X4-5)
$16.60Insulated galvanized register boot, 8×4 opening with 5″ round duct connection. Internally lined to reduce condensation and noise. Compact size for smaller registers.
-
BOOTRAIL – EACH
$0.96Galvanized steel boot rail, sold individually. Used to mount register boots to floor joists in HVAC duct installations. Simple L-shaped support bracket.
-
BP18-8 – THERMOSTAT WIRE ROLL (18G, 8W, 250′)
$147.1518/8 thermostat wire, 250-foot roll. Eight conductors for multi-stage or heat pump systems with accessories. UV-resistant PVC jacket. Covers most residential runs.
-
BPV21 – PIERCING VALVE (1/2″, 5/8″)
$8.12Supco BPV21 Bullet piercing valve for 1/2″ and 5/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.
-
BPV31 – PIERCING VALVE (1/4″, 5/16″, 3/8″)
$8.11Supco BPV31 Bullet piercing valve for 1/4″, 5/16″, and 3/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.
-
BRD05765 – CONTROL BOARD (AMERISTAR)
$203.85Ameristar BRD05765 control board. OEM replacement for Ameristar air handlers. Replaces BRD04300, BRD4300, and BRD5765. Controls blower and system functions.
-
BRK3 – RESETABLE FUSE (3 AMP)
$21.66Supco BRK3 resettable 3 Amp diagnostic fuse for HVAC low-voltage circuits. Built-in light shows when circuit is active. Resets instead of blowing — saves time troubleshooting.
-
BRK5 – RESETABLE FUSE (5 AMP)
$21.66Supco BRK5 resettable 5 Amp diagnostic fuse for HVAC low-voltage circuits. Built-in light shows circuit activity. Trips and resets without blowing — great for troubleshooting.
-
BTG-54VL – LOCKING THERMOSTAT COVER (SOLID, METAL)
$26.61Metal thermostat guard with keyed lock and louvered cover. Prevents tampering in offices, rentals, and commercial spaces. Mounts over existing thermostat.
-
BTG-UN – LOCKING THERMOSTAT COVER (CLEAR, PLASTIC)
$30.83Clear plastic universal thermostat guard with lock. See-through cover fits thermostats up to 7.3″ x 5.25″ x 1.8″. Vented for proper airflow.
-
BW45015 – BLOWER WHEEL (10″ x 10″, CW, CONVEX)
$113.3810″ x 10″ clockwise blower wheel with convex blades and 1/2″ bore. Direct replacement for Goodman B1368047A and Rheem RBW10215. Galvanized steel construction.
-
BW54202 – BLOWER WHEEL (11″ x 9″, CW, CONCAVE)
$168.7911″ x 9″ clockwise blower wheel with concave blades and 1/2″ bore. Cross-references Morrison BW54202. Galvanized steel construction.
-
CAP-1-AM – CEILING ACCESS PANEL (25% RESTOCKING FEE)
$127.41Goodman CAP-1-AM ceiling access panel. Provides access to ceiling-mounted HVAC equipment, plumbing, and electrical. Flush-mount design. 25% restocking fee applies.
-
CAP-2-AM – CEILING ACCESS PANEL (25% RESTOCKING FEE)
$132.31Goodman CAP-2-AM ceiling access panel. Heavy-gauge galvanized steel with white epoxy coating. Surface-mount with hinged door. 25% restocking fee applies.
-
CAP-3-AM – CEILING ACCESS PANEL (25% RESTOCKING FEE)
$136.99Goodman CAP-3-AM ceiling access panel. Heavy-gauge galvanized steel with white epoxy coating. Surface-mount with hinged door. Largest size. 25% restocking fee.
-
CD1454/2 – FITTING (1/4″F to 1/4″M WITH CORE) (2-PACK)
$14.44C&D CD1454/2 brass fitting, 2-pack. 1/4″ female flare to 1/4″ male flare with installed valve core. Adds a Schrader core to a port that doesn’t have one.
-
CD2012 – FITTING (1/4″F to 1/2″M)
$14.03C&D CD2012 brass coupler. 1/4″ female flare swivel to 1/2″ male Acme with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.
-
CD2028 – FITTING (1/4″M to 1/2″F)
$13.07C&D CD2028 brass adapter. 1/4″ male flare to 1/2″ female Acme swivel with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.
-
CD2245 – BRASS CAP (1/4″, 6/PKG)
$3.95C&D CD2245 brass flare caps, 6-pack. 1/4″ with neoprene O-ring seal. Replace missing or damaged caps on refrigerant service valve ports to prevent leaks.
-
![CD9601/2 - TEE FITTING ([1] 1/4F to [2] 1/4M) (PACK OF 2)](https://otp-hvac.com/wp-content/uploads/2024/11/CD9601_SERVICE_VALVE_TEE_FITTING-300x300.png)
CD9601/2 – TEE FITTING ([1] 1/4″F to [2] 1/4″M) (PACK OF 2)
$19.20C&D CD9601/2 brass tee fitting, 2-pack. 1/4″ female flare with depressor to two 1/4″ male flare ports (one with valve core). Adds a branch access point to refrigerant lines.
-
CESO110057-02 – CONTROL BOARD (CARRIER, AFTERMARKET, DIRECT, 50M56D-751)
$199.92Carrier CESO110057-02 control board (ICM281C / 50M56D-751 aftermarket). Fits Carrier single-stage furnaces. Replaces all CESO110057 revisions.
-
CHIPBRUSH2 – DISPOSABLE CHIP BRUSH (2″ WIDE, SHORT)
$1.042″ disposable chip brush with natural bristles and wood handle. Use it to apply PVC glue, clean coils, brush away debris, or spread sealant. Single-use and cheap.
-
CIT3434 – COATED LINE INSULATION (3/4″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)
$16.38UV-coated pipe insulation, 3/4″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 3/4″ copper line.
-
CIT7834 – COATED LINE INSULATION (7/8″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)
$19.00UV-coated pipe insulation, 7/8″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 7/8″ copper line.
-
CNT03797 – CONTROL BOARD (TRANE, 120V, AFTERMARKET, DIRECT, 50A55-3797)
$195.26Trane CNT03797 control board (50A55-3797 aftermarket). 120V integrated furnace control for Trane and American Standard systems. Replaces dozens of CNT numbers.
-
CNT05001 – DEFROST CONTROL BOARD (OEM, TRANE)
$150.77Trane CNT05001 defrost control board for heat pumps. Controls defrost cycle timing to prevent frost buildup on outdoor coil. OEM Trane part.
-
CNT05165 – CONTROL BOARD (TRANE, 80V HSI, AFTERMARKET, DIRECT, 50A65-5165)
$195.70Trane CNT05165 control board (50A65-5165 aftermarket). 80V HSI integrated furnace control for Trane and American Standard systems. Replaces CNT03076 and more.
-
CNT05482 – DEFROST CONTROL BOARD (OEM, TRANE)
$102.53Trane CNT05482 defrost control board for heat pumps. Controls defrost cycle timing to prevent frost buildup on outdoor coil. OEM Trane part.
-
CNT07737 – CONTROL BOARD (OEM, TRANE, CONSTANT TORQUE)
$220.14Trane CNT07737 OEM control board for furnaces with constant torque motors. Replaces CNT04711. Fits TUD1C series and similar Trane/American Standard models.
-
CNT09646 – CONTROL BOARD (OEM, TRANE, S8X1 SERIES)
$207.23Trane CNT09646 (replaces CNT07639, CNT07872) OEM control board for S8X1 series furnaces. Manages ignition, blower, and system safety for Trane furnaces.
-
CNT09648 – CONTROL BOARD (OEM, TRANE, A801X)
$179.88Trane CNT09648 OEM control board for A801X series furnaces. Replaces earlier CNT07940 revision. Full system management with LED diagnostic codes.
-
CO-1 – ZOOM SPOUT LUBRICATING OIL (4 OZ)
$8.78DiversiTech CO-1 Zoom Spout lubricating oil, 4 oz. Telescoping spout extends up to 14 inches for hard-to-reach spots. General-purpose lubricant for HVAC and mechanical work.
-
COIL-SHF-FA4 – SOLENOID COIL
$33.0524VAC solenoid coil for Sanhua SHF-series reversing valves. Controls the reversing valve on heat pump systems to switch between heating and cooling. Spade terminals.
-
COILBRUSH – COIL BRUSH
$4.003″ nylon coil brush for cleaning condenser and evaporator coils. Loosens dirt, dust, and debris between fins without bending them. Basic HVAC maintenance tool.
-
COSOOS – UV FLASHLIGHT
$19.95COSOOS UV flashlight with 6 light modes. USB-rechargeable, aluminum body, telescoping focus lens. UV mode finds refrigerant leaks and mold fast.
-
CP-ID7825 – INSULATED METAL SHEET (30″x48″)
$62.1330″x48″ insulated metal sheet, 26-gauge steel with 1/2″ insulation liner (R-2). Use for building or patching plenums and ductwork. Cut to size with tin snips.
-
CP-MWP – MINISPLIT WEDGE CONDENSATE PUMP
$91.01Everwell mini-split condensate pump with wedge design for tight spaces. Quiet operation, 65-foot max lift. Made specifically for ductless mini-split installations.
-
CT-122 – SERVICE RATCHET WRENCH
$10.95CT-122 service ratchet wrench by Everwell. Four sizes in one chrome-plated tool with reversible ratchet. Built for HVAC valve and fitting work.
-
CT-14516 – MINISPLIT ADAPTOR (5/16″F to 1/4″M)
$14.43Mini-split adapter — 5/16″ female to 1/4″ male. Connects standard 1/4″ gauge hoses to R-410A mini-split service ports. Brass with quick coupler and depressor pin.
-
CT-501 – INSPECTION MIRROR
$7.86Everwell CT-501 telescopic inspection mirror with 360° swivel and chrome finish. Extends to see behind equipment and inside ductwork. Pocket-sized for field use.
-
CT-503 – MAGNETIC TELESCOPING RETRIEVAL TOOL
$6.71Everwell CT-503 telescoping magnetic retrieval tool. Extends up to 25″ with a strong magnetic head for grabbing dropped screws, bolts, and small parts. Pocket clip included.
-
D258 – DOUBLE SHAFT BLOWER MOTOR (1/5-1/10 HP, 1550 RPM, 230V)
$189.72Fasco D258 double-shaft blower motor. 1/5 to 1/10 HP, 1550 RPM, 208-230V. 5-inch diameter with resilient ring mount, sleeve bearings, and auto overload protection.
-
D337 – DOUBLE SHAFT BLOWER MOTOR (1/8 HP, 1550 RPM, 4-SPD, 115V, M5)
$235.34Fasco D337 double-shaft blower motor. 1/8 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount. Fits wall heaters, fan coils, and small units.
-
D338 – DOUBLE SHAFT BLOWER MOTOR (1/6 HP, 1550 RPM, 4-SPD, 115V)
$226.58Fasco D338 double-shaft blower motor. 1/6 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount and auto overload protection. Fits fan coils and PTACs.
-
D6723311S – BLOWER WHEEL (11×10, CW, CONVEX)
$137.2211″ x 10″ clockwise blower wheel with convex blades and 1/2″ bore. OEM Goodman part. Also replaces B1368000S and Carrier LA22ZA127.
![CD9601/2 - TEE FITTING ([1] 1/4F to [2] 1/4M) (PACK OF 2)](https://otp-hvac.com/wp-content/uploads/2024/11/CD9601_SERVICE_VALVE_TEE_FITTING-300x300.png.webp)
