0125 – PVC CUTTING TOOL (3/8″ to 1″)
$13.19PVC cutting tool for 3/8″ to 1″ pipe. One-hand ratcheting design for clean cuts on condensate drain lines and small PVC pipes.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
Showing 1–48 of 164 results
-
-
0781-4240 – ACETYLENE REGULATOR
$114.82Victor G150-15-200R acetylene regulator. Compact single-stage design for light-duty brazing and soldering. CGA200 connection fits standard acetylene tanks.
-
0781-4241 – OXYGEN REGULATOR
$114.82Victor G150-60-540R oxygen regulator. Compact single-stage design for light-duty welding and brazing. CGA540 connection fits standard oxygen tanks.
-
1/8ALLEN – WRENCH
$9.58Malco WT918G T-handle hex key, 1/8″ size, 9″ long. Vinyl cushion grip for torque. Alloy steel construction for HVAC service valve and setscrew work.
-
10006 – NEEDLE NOSE PLIER
$8.496-inch needle nose pliers with serrated jaws. Reaches into tight spaces for bending wire, pulling pins, and grabbing small parts on HVAC equipment.
-
10014 – ADJUSTABLE CHANNEL WRENCH (10″)
$9.9910-inch adjustable channel wrench with precision jaws and non-slip handles. Chrome-plated for rust resistance. General-purpose HVAC and plumbing grip tool.
-
15514 – JUMPER CORD (CLAMPS TO SOCKET)
$15.75Jumper cord with alligator clips on one end and a female socket on the other. Used for temporary power during HVAC and electrical diagnostics. For professional use.
-
15660 – REFRIGERANT HOSE (3/8″ HOSE, 5′ LONG)
$67.11Yellow Jacket 15660 heavy-duty 3/8″ charging and vacuum hose, 60″ (5 ft). 600 psi working pressure, 3000 psi burst. For larger systems and faster vacuum pulldown.
-
16569 – 6-IN-1 SCREWDRIVER
$5.996-in-1 multi-bit screwdriver with Phillips, slotted, and nut driver tips. One tool handles most HVAC panel screws and terminal connections.
-
1839046 – SERVICE HEX KEY ADAPTER
$7.25Hilmor service hex key adapter for 3/16″ and 5/16″ hex valves. Makes opening liquid and suction service valves quick and easy without fumbling for Allen keys.
-
19020 – QUICK COUPLER HOSE GASKET (1/4″)
$10.56Yellow Jacket 19020 quick coupler gaskets for 1/4″, 5/16″, and 1/2″ Acme hose fittings. Replacement seals to stop hose leaks. Pack of gaskets.
-
19041 – SEALRIGHT COMPLETE OVERHAUL KIT (LOW LOSS REBUILD)
$18.45Yellow Jacket 19041 SealRight 1/4″ complete overhaul kit. Rebuilds your low-loss quick couplers with new seals, springs, and o-rings. Cheaper than replacing the whole coupler.
-
19109 – SEALRIGHT FITTING (STRAIGHT, 1/4″, LOW LOSS)
$20.88Yellow Jacket 19109 SealRight 1/4″ straight low-loss fitting. Traps refrigerant automatically when you disconnect. Male flare, straight design.
-
19209 – SEALRIGHT FITTING (ELBOW, 1/4″, LOW LOSS)
$21.29Yellow Jacket 19209 SealRight 1/4″ 90-degree low-loss fitting. Traps refrigerant automatically when you disconnect. Male flare, elbow design for tight spaces.
-
1948778 – 6-IN-1 NUT DRIVER
$14.98Irwin 6-in-1 SAE nut driver. Six sizes (1/4″ to 1/2″) in one compact tool. Covers the most common nut driver sizes for HVAC sheet metal screws.
-
1948779 – EXTENDING SCREWDRIVER
$12.98Irwin 1948779 extending screwdriver. Shaft extends from 5″ to 11″ for hard-to-reach screws. Includes 5 impact bits. Handy for HVAC equipment access panels.
-
21012 – SHORT RECOVERY DRIER HOSE
$22.43Yellow Jacket 21012 PLUS II 12-inch recovery drier hose. 1/4″ with standard flare fittings. Short hose for connecting a filter drier inline during recovery.
-
21985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ STANDARD FITTING)
$98.04Yellow Jacket 21985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with standard flare fittings. Red, blue, and yellow. Double barrier construction for all refrigerants.
-
22985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ LOW LOSS FITTING)
$121.82Yellow Jacket 22985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with SealRight low-loss fittings. Red, blue, yellow. Traps refrigerant on disconnect.
-
24F – METAL FOLDING TOOL
$39.68Malco 24F metal folding tool, 24 inches long. Dual folding depths (3/8″ and 1″) for bending sheet metal edges. Heavy-duty steel for ductwork fabrication.
-
25006 – TINNING HAMMER (40oz)
$16.9040oz tinning hammer with polished striking face and wooden handle. Built for bending, seaming, and forming sheet metal ductwork in HVAC installations.
-
25985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ BALL VALVE FITTING)
$181.61Yellow Jacket 25985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with FlexFlow ball valve fittings. Red, blue, yellow. Instant shutoff at the hose end.
-
2AM-T – ACETYLENE TORCH HANDLE (QUICK CONNECT)
$81.96TurboTorch 2AM-T acetylene torch handle with quick-connect tip fitting. Extreme Swirl Technology for efficient heat distribution. The handle that most HVAC brazing tips connect to.
-
30022 – AVIATION SNIP (STRAIGHT)
$10.99Straight-cut aviation snips with hardened steel blades. Cuts sheet metal, aluminum flashing, and thin steel cleanly. Ergonomic handles for all-day use.
-
30023 – AVIATION SNIP (RIGHT)
$9.99Right-cut aviation snips with hardened steel blades. Makes right-turning curves and straight cuts in sheet metal. Ergonomic non-slip handles.
-
301 – VALVE CORE REMOVAL TOOL
$42.77Cliplight 301 valve core removal tool. Removes and installs Schrader valve cores without losing refrigerant charge. Seals the port while you work.
-
30V 1# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
$26.54Victor 1-W-J torch tip for J Series light-duty torches. Good for smaller brazing and soldering jobs on thin copper. Precise flame control for detail work.
-
30V 2# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
$26.54Victor 2-W-J torch tip for J Series light-duty torches. Mid-range tip for general brazing and soldering on copper. Controlled heat output.
-
30V 3# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
$26.54Victor 3-W-J torch tip for J Series light-duty torches. Largest in the J Series — more heat for bigger copper tubing and heavier brazing jobs.
-
33003 – MINI TUBING CUTTER (1/8-7/8)
$7.99Mini tubing cutter, 1/8″ to 7/8″ OD capacity. Small enough for tight spaces around coils and line sets. Clean cuts on copper, aluminum, and brass.
-
33004 – TUBING CUTTER (UP TO 1-1/8″)
$9.99Tubing cutter for 1/8″ to 1-1/8″ OD tubing. High-carbon steel blade with micrometer adjuster for precise cuts on copper and aluminum refrigerant lines.
-
33006 – TUBING CUTTER (UP TO 2½”)
$21.75Tubing cutter for up to 2-1/2″ OD. Quick-action ratcheting design cuts copper, aluminum, and plastic tubing. Handles large line sets and drain lines.
-
36104 – RATCHETING PVC CUTTING TOOL
$17.69Ratcheting PVC cutter — cuts plastic pipe and tubing up to 2″ with smooth, burr-free results. Ratchet action reduces hand strain on bigger cuts.
-
36105 – HOLE CUTTER
$47.89Adjustable hole cutter for sheet metal. Creates clean circular holes for ductwork, vents, and registers. Fits in a standard drill chuck.
-
36106 – REPLACEMENT BITS FOR 36105 (5PC)
$23.495-pack replacement bits for the 36105 adjustable hole cutter. Hardened steel for clean, burr-free cuts in sheet metal ductwork.
-
36113 – DUCT KNIFE (DOUBLE SIDED – SERRATED & STRAIGHT)
$15.15Double-sided duct knife with serrated and straight edges. Ergonomic handle and puncture-resistant sheath included. Cuts duct board, insulation, and flex duct.
-
38013 – SCREWDRIVER SET (6+1PC, INSULATED)
$15.896-piece insulated screwdriver set rated to 1000V. Phillips and slotted tips with ergonomic handles. Required for safe electrical and HVAC work.
-
42004 – REFRIGERANT MANIFOLD GAUGES (R404A/R22/R410A, BRASS, 5′ HOSE SET)
$175.55Yellow Jacket 42004 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-404A, R-22, and R-410A.
-
42036 – REFRIGERANT MANIFOLD GAUGES (R32/R454B/R410A, BRASS, 5′ HOSE SET)
$193.10Yellow Jacket 42036 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-32, R-454B, and R-410A — ready for next-gen refrigerants.
-
46010 – REFRIGERANT MANIFOLD GAUGES (4 VALVE, ALUMINUM, NO HOSES)
$265.89Yellow Jacket 46010 BRUTE II 4-valve manifold — aluminum body, 3/8″ bore, no hoses. Full-size 3-1/8″ gauges. Faster vacuum and charging than 2-valve manifolds.
-
48-32-4803 – BIT HOLDER
$2.99Milwaukee 48-32-4803 magnetic bit holder. 3-inch impact-duty design locks bits tight during high-torque driving. Fits all standard 1/4″ hex shank bits.
-
49100 – REPLACEMENT CRYSTAL (3-1/8″)
$10.24Yellow Jacket 49100 replacement gauge crystal, 3-1/8″ (80mm). Polycarbonate. Fits BRUTE II manifolds and other 3-1/8″ dry gauges. Clear view, impact resistant.
-
49190 – GAUGE BOOTS (3-1/8″ PROTECTIVE RUBBER COVERS)
$25.47Yellow Jacket 49190 protective gauge boot set — red and blue rubber covers for 3-1/8″ manifold gauges. Cushion against drops and impacts without blocking the gauge face.
-
5/32ALLEN – WRENCH
$9.88Malco WT9532G T-handle hex key, 5/32″ size, 9″ long. Vinyl cushion grip and alloy steel. Common size for HVAC setscrews and motor mount bolts.
-
540560 – ADJUSTABLE WRENCH (10″)
$12.9910-inch adjustable wrench with chrome finish and precision-machined jaws. Standard all-purpose wrench for HVAC nuts, bolts, and fittings.
-
560166 – SIDE CUTTER
$7.99Side cutter pliers with hardened steel blades. Compact design for flush-cutting wire in tight spaces. Clean cuts on thermostat wire and control wiring.
-
660613 – WIRE STRIPPER, CRIMPER, CUTTER
$16.98Multi-function wire stripper, crimper, and cutter. Auto-stripping action with Cr-Mo blades. Handles stripping, crimping, and cutting in one tool.
-
7126KAACH-144 – OXY/ACET TWIN HOSES (12′)
$64.6812-foot twin oxy-acetylene hose set, 3/16″ diameter, Grade R, 200 PSI working pressure. Standard B-fitting connections for welding and brazing setups.
