3/4PVC45 – PVC FITTING (3/4″, 45° ELBOW, SCH 40)
$1.313/4″ Schedule 40 PVC 45° elbow (slip x slip). Makes a gradual 45-degree turn in HVAC condensate drain lines. Better flow than a 90° elbow when space allows.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
Showing 49–96 of 276 results
-
-
3/4PVC90 – PVC FITTING (3/4″, 90° ELBOW, SCH 40)
$0.853/4″ Schedule 40 PVC 90° elbow (slip x slip). Standard fitting for making right-angle turns in HVAC condensate drain lines. Glue-joint connections.
-
3/4PVCCAP – PVC PIPE (3/4″, CAP, SCH 40, SLIP FITTING)
$0.683/4″ Schedule 40 PVC slip cap. Glues onto the end of 3/4″ PVC pipe to seal it off. Used on drain line dead ends, test points, and unused connections.
-
3/4PVCCPL – PVC FITTING (3/4″, COUPLING, SCH 40)
$0.653/4″ Schedule 40 PVC coupling (slip x slip). Joins two pieces of 3/4″ PVC pipe end-to-end. Glue-joint connection for condensate drain line repairs and extensions.
-
3/4PVCFADAP – PVC PIPE – FEMALE ADAPTOR (SLIP x FPT, 3/4″)
$1.043/4″ Schedule 40 PVC female adapter (slip x FPT). Transitions from glue-joint PVC to a threaded fitting. Used on HVAC drain lines, drain pans, and cleanouts.
-
3/4PVCMADAP – PVC FITTING – NO GASKET/NUT (3/4″, THREADED MALE ADAPTOR, SCH 40)
$1.173/4″ Schedule 40 PVC male adapter (slip x MPT). Transitions from glue-joint PVC to a male threaded connection. No gasket or nut included — threaded end only.
-
3/4PVCSTICK – PVC PIPE (3/4″ x 10′, SCH 40)
$6.293/4″ x 10′ Schedule 40 PVC pipe. Standard for HVAC condensate drain lines. Glue-joint connections. Cut it to length on-site.
-
3/4PVCTEE – PVC FITTING (3/4″, TEE, SCH 40)
$1.243/4″ Schedule 40 PVC tee (slip x slip x slip). Creates a 90° branch connection in HVAC drain lines. Commonly used for cleanout access or splitting a drain run.
-
3/4PVCTHREADEDCAP – PVC PIPE (THREADED CAP, 3/4″, SCH40)
$1.633/4″ Schedule 40 PVC threaded cap (female pipe thread). Screws onto any 3/4″ male threaded fitting to seal the end. Used on drain line cleanouts and test ports.
-
3/4PVCTRAP – PVC FITTING (3/4″, TRAP, SCH 40)
$2.823/4″ Schedule 40 PVC P-trap (slip x slip). Standard condensate drain trap for HVAC systems. Holds water to create an air seal and prevent air from blowing through the drain line.
-
3/4X50 – COPPER REFRIGERATION TUBING (3/4″ X 50′)
$183.163/4″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Common suction line size for residential AC systems up to 3 tons.
-
3/8C90 – REFRIGERATION COPPER FITTING (3/8″ 90° ELBOW, LONG RADIUS)
$2.503/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
3/8C90ST – REFRIGERATION COPPER FITTING (3/8″ 90° STREET ELBOW, LONG RADIUS)
$2.603/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
3/8CC – REFRIGERATION COPPER FITTING (3/8″ COUPLING WITH STOP)
$1.723/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 3/8″ copper pipe in a straight line. Wrot copper for brazing.
-
3/8X50 – COPPER REFRIGERATION TUBING (3/8″ X 50′)
$77.403/8″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Common liquid line size for residential AC systems.
-
30022 – AVIATION SNIP (STRAIGHT)
$10.99Straight-cut aviation snips with hardened steel blades. Cuts sheet metal, aluminum flashing, and thin steel cleanly. Ergonomic handles for all-day use.
-
30023 – AVIATION SNIP (RIGHT)
$9.99Right-cut aviation snips with hardened steel blades. Makes right-turning curves and straight cuts in sheet metal. Ergonomic non-slip handles.
-
301 – VALVE CORE REMOVAL TOOL
$42.77Cliplight 301 valve core removal tool. Removes and installs Schrader valve cores without losing refrigerant charge. Seals the port while you work.
-
304100 – ROLLED MASTIC SEALANT TAPE (3″ x 100′)
$37.74Hardcast Foil-Grip 1402 rolled mastic sealant tape. 3″ x 100′, 17 mil thick. Butyl adhesive with aluminum foil backing. Instant water-resistant grip for duct sealing.
-
30V 1# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
$26.54Victor 1-W-J torch tip for J Series light-duty torches. Good for smaller brazing and soldering jobs on thin copper. Precise flame control for detail work.
-
30V 2# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
$26.54Victor 2-W-J torch tip for J Series light-duty torches. Mid-range tip for general brazing and soldering on copper. Controlled heat output.
-
30V 3# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
$26.54Victor 3-W-J torch tip for J Series light-duty torches. Largest in the J Series — more heat for bigger copper tubing and heavier brazing jobs.
-
33003 – MINI TUBING CUTTER (1/8-7/8)
$7.99Mini tubing cutter, 1/8″ to 7/8″ OD capacity. Small enough for tight spaces around coils and line sets. Clean cuts on copper, aluminum, and brass.
-
33004 – TUBING CUTTER (UP TO 1-1/8″)
$9.99Tubing cutter for 1/8″ to 1-1/8″ OD tubing. High-carbon steel blade with micrometer adjuster for precise cuts on copper and aluminum refrigerant lines.
-
33006 – TUBING CUTTER (UP TO 2½”)
$21.75Tubing cutter for up to 2-1/2″ OD. Quick-action ratcheting design cuts copper, aluminum, and plastic tubing. Handles large line sets and drain lines.
-
36104 – RATCHETING PVC CUTTING TOOL
$17.69Ratcheting PVC cutter — cuts plastic pipe and tubing up to 2″ with smooth, burr-free results. Ratchet action reduces hand strain on bigger cuts.
-
36105 – HOLE CUTTER
$47.89Adjustable hole cutter for sheet metal. Creates clean circular holes for ductwork, vents, and registers. Fits in a standard drill chuck.
-
36106 – REPLACEMENT BITS FOR 36105 (5PC)
$23.495-pack replacement bits for the 36105 adjustable hole cutter. Hardened steel for clean, burr-free cuts in sheet metal ductwork.
-
36113 – DUCT KNIFE (DOUBLE SIDED – SERRATED & STRAIGHT)
$15.15Double-sided duct knife with serrated and straight edges. Ergonomic handle and puncture-resistant sheath included. Cuts duct board, insulation, and flex duct.
-
38013 – SCREWDRIVER SET (6+1PC, INSULATED)
$15.896-piece insulated screwdriver set rated to 1000V. Phillips and slotted tips with ergonomic handles. Required for safe electrical and HVAC work.
-
42004 – REFRIGERANT MANIFOLD GAUGES (R404A/R22/R410A, BRASS, 5′ HOSE SET)
$175.55Yellow Jacket 42004 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-404A, R-22, and R-410A.
-
42036 – REFRIGERANT MANIFOLD GAUGES (R32/R454B/R410A, BRASS, 5′ HOSE SET)
$193.10Yellow Jacket 42036 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-32, R-454B, and R-410A — ready for next-gen refrigerants.
-
42511 – INSULATION TAPE (2″X30′)
$8.992″ x 30′ self-adhesive insulation tape. Foam tape that prevents condensation on cold pipes and ducts. For HVAC, plumbing, and refrigeration lines.
-
46010 – REFRIGERANT MANIFOLD GAUGES (4 VALVE, ALUMINUM, NO HOSES)
$265.89Yellow Jacket 46010 BRUTE II 4-valve manifold — aluminum body, 3/8″ bore, no hoses. Full-size 3-1/8″ gauges. Faster vacuum and charging than 2-valve manifolds.
-
48-32-4803 – BIT HOLDER
$2.99Milwaukee 48-32-4803 magnetic bit holder. 3-inch impact-duty design locks bits tight during high-torque driving. Fits all standard 1/4″ hex shank bits.
-
49100 – REPLACEMENT CRYSTAL (3-1/8″)
$10.24Yellow Jacket 49100 replacement gauge crystal, 3-1/8″ (80mm). Polycarbonate. Fits BRUTE II manifolds and other 3-1/8″ dry gauges. Clear view, impact resistant.
-
49190 – GAUGE BOOTS (3-1/8″ PROTECTIVE RUBBER COVERS)
$25.47Yellow Jacket 49190 protective gauge boot set — red and blue rubber covers for 3-1/8″ manifold gauges. Cushion against drops and impacts without blocking the gauge face.
-
5/32ALLEN – WRENCH
$9.88Malco WT9532G T-handle hex key, 5/32″ size, 9″ long. Vinyl cushion grip and alloy steel. Common size for HVAC setscrews and motor mount bolts.
-
5/8C90 – REFRIGERATION COPPER FITTING (5/8″ 90° ELBOW, LONG RADIUS)
$2.875/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
5/8C90ST – REFRIGERATION COPPER FITTING (5/8″ 90° STREET ELBOW, LONG RADIUS)
$2.615/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
5/8CC – REFRIGERATION COPPER FITTING (5/8″ COUPLING WITH STOP)
$2.005/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 5/8″ copper pipe in a straight line. Wrot copper for brazing.
-
5/8X50 – COPPER REFRIGERATION TUBING (5/8″ X 50′)
$187.045/8″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Common suction line size for smaller residential AC and mini-splits.
-
540560 – ADJUSTABLE WRENCH (10″)
$12.9910-inch adjustable wrench with chrome finish and precision-machined jaws. Standard all-purpose wrench for HVAC nuts, bolts, and fittings.
-
560166 – SIDE CUTTER
$7.99Side cutter pliers with hardened steel blades. Compact design for flush-cutting wire in tight spaces. Clean cuts on thermostat wire and control wiring.
-
6-1 – PVC DRAIN PAN FITTING (RUBBER GASKET & METAL NUT)
$4.316-1 PVC drain pan fitting with rubber gasket and metal nut, 3/4″ slip. Connects your drain pan to the condensate line. Schedule 40 PVC — won’t leak if installed right.
-
6-1838S – PLASTIC DRAIN PAN
$38.67Plastic secondary drain pan, 18″ x 38″, ABS construction. Sits under your indoor coil or air handler to catch overflow. 3/4″ PVC drain fitting included.
-
6-3030L – PLASTIC DRAIN PAN
$39.57Plastic secondary drain pan, 30″ x 30″, ABS construction. Sits under your indoor coil or air handler to catch overflow. 3/4″ PVC drain fitting. Rolled edges.
-
6-3636L – PLASTIC DRAIN PAN
$46.96Plastic secondary drain pan, 36″ x 36″, ABS construction. Sits under your indoor coil or air handler to catch overflow. 3/4″ PVC drain fitting. Rolled edges.
