VN500 – NITROGEN BRAZING/PURGING REGULATOR
$167.90Western Enterprises VN500 nitrogen purging regulator. Built specifically for HVAC nitrogen purge during brazing. Precise low-flow control to prevent oxidation inside copper lines.
Showing 1249–1291 of 1291 results
-
-
VP67 – VACUUM PUMP (6 CFM, 2-STAGE, A2L)
$511.30Fieldpiece VP67 vacuum pump, 6 CFM, 2-stage, A2L compatible. RunQuick oil change system for fast maintenance. Built for fast, deep evacuations on AC installations.
-
VR8200A2132 – FURNACE GAS VALVE (STANDING, STANDARD)
$194.21Honeywell VR8200A2132 standing pilot gas valve. Standard-opening, 24V, single-stage. Replaces VR8200A2116. Also fits Goodman B1282602.
-
VR8200H1251 – FURNACE GAS VALVE (STANDING, SLOW)
$236.99Honeywell VR8200H1251 standing pilot gas valve. Slow-opening, 24V, 1/2″ NPT connections. Replaces VR8200H1012. For older standing pilot furnaces.
-
VR8345K4809 – FURNACE GAS VALVE
$219.00Resideo VR8345K4809 universal electronic ignition gas valve. Works with intermittent pilot, hot surface, or direct spark ignition. 24 VAC.
-
VR8345M4302 – FURNACE GAS VALVE
$227.72Honeywell VR8345M4302 universal electronic ignition gas valve. Up to 300 CFH natural gas capacity. 24 VAC. Replaces Rheem 903596 and VR8205R2091.
-
VR8345Q4563 – FURNACE GAS VALVE (2-STAGE, 3/4″ x 3/4″ w/ BUSHINGS)
$263.16Honeywell VR8345Q4563 two-stage gas valve with 3/4″ x 3/4″ connections and reducer bushings. Universal electronic ignition. 24 VAC. Major cross-reference list.
-
VVC-1 – VALVE CORE – 6 PACK
$4.99DiversiTech VVC-1 valve core 6-pack. Brass and stainless steel Schrader cores with 1/4″ SAE ports. Replacement cores for refrigerant service valves and access fittings.
-
W51-11BDV-04 – BLOWER MOTOR – ECM X13 – CONSTANT TORQUE (1 HP, DUAL VOLTAGE)
$384.561 HP ECM X13 constant-torque blower motor, 115/208-230V dual voltage. Replaces multiple Goodman, Trane, and Lennox X13 motors. Preprogrammed with harness included.
-
W51-12BAA3-02 – BLOWER MOTOR – FURNACE (1/2 HP, 120V, 10MFD)
$152.291/2 HP furnace blower motor, 115V, 1075 RPM, 4-speed with 10 MFD capacitor required. Replaces WG840463 and multiple Goodman/Trane furnace motors. Reversible rotation.
-
W51-12BJA3-02 – BLOWER MOTOR – AIR HANDLER (1/2 HP, 240V, 10MFD)
$152.611/2 HP air handler blower motor, 208-230V, 3-speed, reversible rotation. Requires 10 MFD capacitor. Replaces Lennox 19L38 and D801205P01.
-
W51-13BAA3-02 – BLOWER MOTOR – FURNACE (1/3 HP, 120V, 10MFD)
$140.561/3 HP furnace blower motor, 120V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. Fits Goodman, Trane, Lennox, Carrier, and other 115V furnaces.
-
W51-13BJA3-02 – BLOWER MOTOR – AIR HANDLER (1/3 HP, 240V, 10MFD)
$138.531/3 HP air handler blower motor, 208-230V, 3-speed, reversible rotation. Requires 10 MFD capacitor. Replaces Lennox 19L36 and multiple GE/Genteq motors.
-
W51-14BAA3-02 – BLOWER MOTOR – FURNACE (1/4 HP, 120V, 10MFD)
$135.341/4 HP furnace blower motor, 120V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. Budget-friendly option for smaller furnaces and air handlers.
-
W51-14BJA3-02 – BLOWER MOTOR – AIR HANDLER (1/4 HP, 240V, 10MFD)
$136.321/4 HP air handler blower motor, 208-230V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. The 230V version for air handlers that need a 1/4 HP motor.
-
W51-14CJJ1-02 – CONDENSER MOTOR (1/4 HP, 825 RPM, 48Y, 5MFD)
$147.661/4 HP 825 RPM condenser fan motor, 208-230V, 48Y frame, 5 MFD cap. Direct OEM replacement for Goodman, Lennox, and other brands.
-
W51-16CJA1-02 – CONDENSER MOTOR (1/6 HP, 1075 RPM, 10MFD)
$129.721/6 HP 1075 RPM condenser fan motor, 208-230V, 10 MFD cap required. Direct replacement for WG840727. Fits multiple residential condenser brands.
-
W51-34BDV-04 – BLOWER MOTOR – ECM X13 – CONSTANT TORQUE (3/4 HP, DUAL VOLTAGE)
$342.653/4 HP ECM X13 constant-torque blower motor, 115/208-230V dual voltage. Replaces multiple Goodman, Trane, and Lennox X13 motors. Preprogrammed with harness.
-
W51-34BJA3-02 – BLOWER MOTOR – AIR HANDLER (3/4 HP, 240V, 15MFD)
$159.403/4 HP air handler blower motor, 208-230V, 1075 RPM, 3-speed reversible. Requires 15 MFD capacitor. Replaces Lennox 19L40 and WG840590.
-
W51-MHBAA4-03 – BLOWER MOTOR – FURNACE (3/4 HP, 120V, 15MFD)
$167.563/4 to 1/5 HP furnace blower motor, 115V, 1075 RPM, multi-speed reversible. Requires 15 MFD capacitor. Fits Trane, Carrier, and other 115V furnaces.
-
W51-MHBDV-04 – BLOWER MOTOR – ECM X13 – CONSTANT TORQUE (1/2-1/3 HP, DUAL VOLTAGE)
$335.231/2 to 1/3 HP ECM X13 constant-torque blower motor, dual voltage 115/208-230V. Fits Goodman, Trane, Lennox, and more. Preprogrammed with installation harness.
-
W51-MHCJA1-02 – CONDENSER MOTOR (1/3 – 1/4 – 1/5 HP, 1075 RPM, 10 MFD)
$142.691/3 to 1/5 HP condenser fan motor, 1075 RPM, 208-230V, 10 MFD cap. Multi-HP replacement for Goodman, Trane, Carrier, Lennox, and more.
-
WG840203 – CONDENSER MOTOR (1/6 HP, 825 RPM, 5MFD)
$145.201/6 HP 825 RPM condenser fan motor, 208-230V, 48-frame, 5 MFD cap required. Reversible rotation with overload protection. Fits Goodman, Trane, and more.
-
WG840464 – BLOWER MOTOR – AIR HANDLER (1/2-1/6 HP, 240V, 10MFD)
$167.931/2 to 1/6 HP air handler blower motor, 208-230V, 1075 RPM with reversible rotation. Requires 10 MFD capacitor. Thermal overload protection built in.
-
WG840465 – CONDENSER MOTOR (1/3-1/5 HP, 1075 RPM, 2-SPD, 5MFD)
$183.161/3-1/5 HP 2-speed condenser fan motor, 1075 RPM, 208-230V, 5 MFD cap. Ball bearings with reversible rotation. Fits multiple residential condensers.
-
WG840469 – CONDENSER MOTOR (1/3-1/5 HP, 825 RPM, 2-SPD, 7.5MFD)
$165.801/3-1/5 HP 2-speed condenser fan motor, 825 RPM, 208-230V, 7.5 MFD cap. Reversible rotation with thermal overload protection.
-
WH2TZ6024STANNJ – AIR HANDLER (5 TON, R410A, 24″, SEER2)
$1,635.02Rheem RH2TZ6024STANNJ 5-ton air handler. Constant Torque ECM motor, R-410A compatible, SEER2 compliant. 24″ wide cabinet with multiple installation options.
-
WNB – WIRE NUT (BLUE, 100CT)
$5.09Blue wire nuts, 100-count bag. Twist-on wire connectors for 22-14 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
-
WNO – WIRE NUT (ORANGE, 100CT)
$5.89Orange wire nuts, 100-count bag. Twist-on wire connectors for 22-14 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
-
WNR – WIRE NUT (RED, 100CT)
$8.99Red wire nuts, 100-count bag. Twist-on wire connectors for 14-6 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
-
WNY – WIRE NUT (YELLOW, 100CT)
$6.79Yellow wire nuts, 100-count bag. Twist-on wire connectors for 18-10 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
-
WYE101010
$25.0410″ x 10″ x 10″ galvanized duct wye. Splits one 10″ round duct into two equal 10″ branches. Standard fitting for residential HVAC ductwork.
-
WYE1088
$22.4310″ x 8″ x 8″ galvanized duct wye. Reduces a 10″ trunk into two 8″ branch ducts. Standard fitting for residential HVAC ductwork.
-
WYE121212
$30.6112″ x 12″ x 12″ galvanized duct wye. Splits one 12″ round duct into two equal 12″ branches. Standard fitting for residential HVAC ductwork.
-
WYE1299
$25.8212″ x 9″ x 9″ galvanized duct wye. Reduces a 12″ trunk into two 9″ branch ducts. Standard fitting for residential HVAC ductwork.
-
WYE444
$20.314″ x 4″ x 4″ galvanized duct wye. Splits one 4″ round duct into two equal 4″ branches. Standard fitting for residential HVAC ductwork.
-
WYE666
$22.256″ x 6″ x 6″ galvanized duct wye. Splits one 6″ round duct into two equal 6″ branches. Standard fitting for residential HVAC ductwork.
-
WYE755
$19.747″ x 5″ x 5″ galvanized duct wye. Reduces a 7″ trunk into two 5″ branch ducts. Standard fitting for residential HVAC ductwork.
-
WYE866
$17.688″ x 6″ x 6″ galvanized duct wye. Reduces a 8″ trunk into two 6″ branch ducts. Standard fitting for residential HVAC ductwork.
-
WYE888
$20.978″ x 8″ x 8″ galvanized duct wye. Splits one 8″ round duct into two equal 8″ branches. Standard fitting for residential HVAC ductwork.
-
WYE977
$22.439″ x 7″ x 7″ galvanized duct wye. Reduces a 9″ trunk into two 7″ branch ducts. Standard fitting for residential HVAC ductwork.
-
ZC-01 – COIL CLEANER (YELLOW, AEROSOL)
$11.14Hydro-Balance ZipFoam ZC-01 condenser coil cleaner, 18 oz aerosol. Non-acidic foaming spray for outdoor coils. Ready to use — no mixing needed. Rinse with hose.
-
ZC-02 – COIL CLEANER (GREEN, AEROSOL)
$11.14Hydro-Balance Zip Clean ZC-02 evaporator coil cleaner, 18 oz aerosol. Self-rinsing foaming spray for indoor coils. No water rinse needed — drains into the pan.
