HS1P1S – HEAT SEQUENCER (SPST, Q101)
$27.3524V SPST heat sequencer (1 switch). Supco Q101. Basic single-stage sequencer for electric furnaces. Controls one heating element or blower.
Showing 769–816 of 1291 results
-
-
HS1P2S – HEAT SEQUENCER (SPST, Q102)
$28.4024V SPST heat sequencer (1 switch). Supco Q102. Longer delay timing than Q101. Controls one heating element or blower in electric furnaces.
-
HS2P1S – HEAT SEQUENCER (DPDT, Q103)
$29.4524V DPDT heat sequencer (2 switches). Supco Q103. Controls a heating element and a blower motor on timed delays. Replaces 24A34-3.
-
HS2P2S – HEAT SEQUENCER (DPDT, Q104)
$29.4524V DPDT heat sequencer (2 switches). Supco Q104. Different delay timing than Q103. Replaces HS24A344, Emerson E143, and NS104.
-
HS31032 – HEAT SHIELD GEL (32 OZ)
$18.12Supco HS31032 Heat Shield Gel, 32 oz. Protects surrounding surfaces while brazing or soldering. Non-toxic, non-corrosive, evaporates in 24-48 hours.
-
HS3P1S – HEAT SEQUENCER (HS24A345, DPST-SPST)
$41.8124V heat sequencer with 1 DPST and 1 SPST relay in series. Handles up to 25 amps. Replaces Nordyne 621678 and HS24A345. Common electric furnace part.
-
HS4P1S – HEAT SEQUENCER (HS24A346, 2 DPDT)
$42.4024V heat sequencer with two DPDT relays in series. Handles up to 25 amps. Replaces HS24A346. For electric furnaces with multi-stage heating elements.
-
ICM271C – CONTROL BOARD (CARRIER)
$154.08ICM271C control board for Carrier furnaces. Replaces HH84AA010 through HH84AA020 series. Aftermarket board with OEM-equivalent performance and diagnostics.
-
ICM275C – CONTROL BOARD (CARRIER)
$136.71ICM275C control board for Carrier furnaces. Replaces HH84AA001, HH84AA003, HH84AA005, HH84AA009, HH84AA014, HH84AA015, HH84AA021. Aftermarket direct fit.
-
ICM2812-KIT – CONTROL BOARD KIT (UNIVERSAL, GAS)
$194.39ICM2812-KIT universal gas furnace control board kit. Replaces 200+ OEM boards including White-Rodgers 50M56U-843. Includes mounting hardware and wiring.
-
ICM517 – SURGE PROTECTOR
$104.99ICM Controls ICM517 surge protector. 100,000 amp peak surge rating for single-phase HVAC equipment. Robust protection against lightning and power surges.
-
IG401 – HOT SURFACE IGNITOR (AMANA)
$37.66Supco IG401 hot surface ignitor for Amana furnaces. Silicon carbide. Direct replacement for 767A-369 and D9918202A.
-
IG409 – HOT SURFACE IGNITOR (CARRIER)
$37.66Supco IG409 hot surface ignitor for Carrier furnaces. Silicon carbide. Direct replacement for 767A-370 and LH33ZS004.
-
IG418 – HOT SURFACE IGNITOR (GOODMAN, TRANE, RHEEM)
$37.66Supco IG418 hot surface ignitor for Goodman, Trane, and Rheem furnaces. Silicon carbide. Replaces B1401015 and 767A-372.
-
IG80V – HOT SURFACE IGNITOR (80V, UNIVERSAL)
$71.43Universal 80V hot surface ignitor with silicon nitride element. Fits most 80V furnaces across Goodman, Trane, Rheem, Lennox, and more. Includes multiple brackets and spacers.
-
IGN00152 – HOT SURFACE IGNITOR (TRANE, AFTERMARKET, DIRECT, SSN087KS)
$63.21Silicon nitride ignitor for Trane/American Standard furnaces. 120V. Replaces IGN00152 and IGN00146. Direct replacement SSN087KS.
-
IRC-120 – THERMAL CAMERA
$175.00IRC-120 thermal imaging camera. Spots hot and cold spots in ductwork, finds electrical issues, and checks insulation. Compact and easy to use for HVAC diagnostics.
-
IRHT81736 – RATCHETING TUBING CUTTER
$29.97Irwin IRHT81736 ratcheting tubing cutter. Cuts copper, brass, PVC, and aluminum from 1/4″ to 1-1/8″ OD. Ratchet action for tight spaces.
-
ISO-4 – ISOLATION PAD (4″ x 4″)
$1.804″ x 4″ x 3/4″ rubber isolation pad by DiversiTech. Reduces vibration and noise from outdoor AC units. Suction-cup grip — no bolts needed. Sold individually.
-
IT11834 – ARMAFLEX (1-1/8″ ID X 3/4″ T X 6′)
$8.03ArmaFlex pipe insulation, 1-1/8″ ID x 3/4″ wall, 6-foot stick. Fits 1-1/8″ copper suction line. Prevents condensation and energy loss on refrigerant lines.
-
IT3434 – LINE INSULATION (3/4″ ID x 3/4″ WALL x 6′ T)
$6.51ArmaFlex pipe insulation, 3/4″ ID x 3/4″ wall, 6-foot stick. Fits 3/4″ copper (5/8″ OD line). Prevents condensation and energy loss on refrigerant and water lines.
-
IT7834 – LINE INSULATION (7/8″ ID x 3/4″ WALL x 6′ T)
$6.74ArmaFlex pipe insulation, 7/8″ ID x 3/4″ wall, 6-foot stick. Fits 7/8″ copper suction line. Prevents condensation and energy loss on refrigerant lines.
-
JL3KH6 – WIRELESS REFRIGERANT CHARGE AND AIR TEST KIT
$729.55Fieldpiece JL3KH6 wireless charge and air test kit. Includes pressure probes, pipe clamps, and psychrometers for real-time HVAC diagnostics via Job Link app.
-
JL3KR4 – WIRELESS REFRIGERANT CHARGE KIT
$485.05Fieldpiece JL3KR4 wireless refrigerant charge kit. Pressure probes and pipe clamps with 1000-foot wireless range and Rapid Rail sensors for fast superheat/subcooling readings.
-
JP20-8 – THERMOSTAT WIRE ROLL (20 AWG, 8 WIRE, 125′)
$66.2320/8 thermostat wire, 125-foot roll. Eight conductors, lighter 20-gauge for shorter runs. Good for heat pump and multi-stage systems. Southwire brand.
-
JV1 – CONDENSATE CLEANOUT VALVE
$17.99Supco JV1 condensate cleanout valve. Installs inline on 3/4″ drain lines — open it to flush the line or attach a drain gun. Easy maintenance access point.
-
KBHC – BLADE – FG1
$12.28Malco KBHC replacement blade for the FG1 duct board hole cutter. Cuts 1.5″ thick fiberglass duct board. Durable steel blade — keeps cuts clean and precise.
-
KC100P – OXY/ACET TORCH KIT (INCLUDE TANKS AND GAS)
$605.91Uniweld KC100P oxyacetylene torch kit with tanks and gas included. Welds up to 1/8″ steel, brazes up to 1″ copper. Complete portable outfit — ready to use out of the box.
-
KIT03033 – IGNITOR (TRANE, AFTERMARKET, DIRECT, SKIT03033)
$56.38Supco SKIT3033 hot surface ignitor for Trane furnaces. Silicon carbide. Direct replacement for Trane KIT03033.
-
L60765804 – FAN BLADE HUB
$14.68Lau L60765804 universal fan blade hub, 1/2″ bore. Steel construction with hex and round mounting options. Includes set and mounting screws.
-
LA11AA005 – INDUCER WHEEL (A65569BW)
$32.14Aftermarket inducer blower wheel for Carrier/Bryant furnaces. 28 blades, clockwise rotation, 4″ diameter, 0.31″ bore. Replaces LA11AA005.
-
LA11XA046 – INDUCER WHEEL (BW11046)
$43.46Aftermarket inducer blower wheel for Carrier/Bryant furnaces. 4.5″ diameter, 1.65″ width, CCW rotation. Replaces LA11XA046. Cheaper fix than replacing the whole assembly.
-
LA11XA048 – INDUCER WHEEL (A65048BW)
$36.61Aftermarket inducer blower wheel for Carrier/Bryant furnaces. Clockwise rotation, 3.82″ diameter, 5/16″ bore. Replaces LA11XA048.
-
LA22ZA118 – BLOWER WHEEL (11″ x 10″, CLOCKWISE, CONVEX)
$255.9211.75″ x 10.75″ clockwise blower wheel with convex blades. OEM Carrier/Bryant/Payne part. Replaces LA22ZA117 and LA22ZA117A.
-
LA660002 – INDUCER WHEEL (A65569FB)
$17.67Aftermarket inducer blower wheel for Carrier/Bryant furnaces. Replaces LA660002. Use when the wheel is cracked, chipped, or wobbling — no need to replace the whole motor.
-
LB-91097C – IGNITION CONTROL REPLACEMENT KIT (17W82)
$425.97Lennox 17W82 (LB-91097C) ignition control replacement kit. Replaces multiple older Lennox furnace boards including 21L890 and 72K79. Complete kit with harness.
-
LH33WP003 – CONTROL BOARD (RTU, CARRIER, AFTERMARKET, DIRECT, ICM291)
$320.67ICM291 direct spark ignition control board. Aftermarket replacement for Carrier LH33WP003. Used in Carrier rooftop units and furnaces to control the ignition sequence.
-
LH680534 – FLAME SENSOR (CARRIER, AFTERMARKET, DIRECT, FLS014)
$23.44Carrier flame sensor replacement (LH680534). Aftermarket direct fit with 73-degree bend and Kanthal rod. Replaces LH33WZ515, LH33WZ517, LH33WZ521, and more.
-
LLD032 – REFRIGERANT DRIER (RECOVERY MACHINE, 1/4″ THREADED)
$16.891/4″ threaded liquid line drier for refrigerant recovery machines. Solid core design removes moisture and acid. Compatible with all refrigerants.
-
LS14381230DMSF – MINISPLIT LINE SET (FLARED, 30FT)
$133.2530′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Longer run for installs where the condenser is far from the wall unit.
-
LS1538-14X38 – INSULATED MINISPLIT LINE SET (FLARED, 15′)
$91.0715′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Ready to install — no flaring tool needed.
-
LS2538-14X12 -MINISPLIT LINE SET (25FT, FLARED)
$144.10Mini-split line set — 25 ft, 1/4″ liquid x 1/2″ suction, pre-flared ends. Insulated suction line. Ready to install on most 9,000-12,000 BTU ductless systems.
-
LS2538-14X38 – MINISPLIT LINE SET (FLARED, 25FT)
$131.55Mini-split line set — 25 ft, 1/4″ liquid x 3/8″ suction, pre-flared ends. Insulated suction line. Fits most 9,000 BTU ductless systems.
-
LSC4 – LINE SET COVER (4x4x4x10′)
$51.92Galvanized metal line set cover, 4″ x 4″ x 4″, 10 feet long. Covers and protects refrigerant copper lines running along the outside of the house. Includes flange mounts and cap.
-
LSCC – CAP ONLY – LINE SET COVER
$10.01End cap for galvanized metal line set cover. Provides a finished look at the end of the line set cover run. Sold individually.
-
LSCMS – MINI SPLIT LINE SET COVER (1 & 1.5T, CDS-2)
$63.53Everwell CDS-2 mini-split line set cover for 1-1.5 ton systems. Protects refrigerant lines and wiring from weather and UV. Clean, professional look.
-
LSCMS2 – MINI SPLIT LINE SET COVER (2 & 3T, CDS3, 4″x2.75″x13′)
$81.48Everwell CDS-3 mini-split line set cover for 2-3 ton systems. 4″ x 2.75″ x 13′ length. Protects refrigerant lines from weather and UV damage.
-
LT-CTB – COMPACT TUBING BENDER KIT (1/4″ – 7/8″)
$96.994LifetimeLines LT-CTB compact tubing bender kit. Bends 1/4″ to 7/8″ soft copper, aluminum, and brass tubing. Makes clean bends without kinking.
