60/7.5/440 – DUAL CAPACITOR (ROUND, MADE IN USA)
$40.8560+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.
Showing 337–384 of 1291 results
-
-
60+10X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$29.5060+10 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
60+5X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$29.9560+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
60+7.5X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$30.0560+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
60556501 – FAN BLADE (3, 18″, 33°, CW, HUBLESS)
$84.5518″ aluminum 3-blade condenser fan blade. 33° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.
-
607436-05 – CONTROL BOARD (23C48)
$403.50Lennox 23C48 (607436-05) ignition control board. OEM replacement for Lennox, Ducane, and Armstrong furnaces. Replaces earlier 607436-03 and 607436-06 revisions.
-
619559-01 – DEFROST BOARD (LENNOX, 16V37)
$146.63Lennox 619559-01 defrost control board kit (16V37) for heat pumps. Time/temperature defrost with anti-short-cycle protection. OEM Lennox.
-
62-104058-02 – CONTROL BOARD (RHEEM, OEM, GAS, SPARK IGN)
$189.93Rheem 62-104058-02 OEM control board for gas furnaces with spark ignition. Also listed as 1194-200. Manages ignition, flame sensing, and blower operations.
-
62-105217-01 – CONTROL BOARD (RHEEM, OEM, GAS, SPARK IGN)
$218.71Rheem 62-105217-01 OEM control board for gas furnaces with spark ignition. Manages ignition, flame sensing, and blower operations in Rheem/Ruud systems.
-
62-23543-01 – FLAME SENSOR (RHEEM)
$20.87Rheem 62-23543-01 flame sensor replacement. Fits Rheem and Ruud furnace models including RGPH and UGPH series. Aftermarket direct fit, listed as FLS301.
-
62-24044-71 – FLAME SENSOR RETROFIT KIT (RHEEM)
$66.81Rheem 62-24044-71 non-integrated flame sensor retrofit kit. Upgrades older Rheem/Ruud furnaces to a standalone flame sensor. OEM kit with all hardware included.
-
62-24084-82 – CONTROL BOARD (RHEEM, AFTERMARKET, DIRECT REPLACEMENT, ICM288)
$261.91Rheem 62-24084-82 integrated furnace control board (ICM288 aftermarket). Direct replacement for Rheem gas furnaces. Manages ignition and blower operations.
-
62-24140-04 – CONTROL BOARD (RHEEM, GAS, OEM)
$217.69Rheem 62-24140-04 OEM control board for gas furnaces with direct spark ignition. Replaces 62-24140-02. ICM292 is the aftermarket equivalent. Fits RGPH/UGPH models.
-
62-24164-01 – SPARK IGNITOR (ROUND PIN, RHEEM)
$36.64Rheem OEM direct spark ignitor with round pin connector. Part 62-24164-01. For Rheem/Ruud furnaces with spark ignition (not hot surface).
-
62-24164-03 – SPARK IGNITOR (5/16″ QUICK CONNECT, RHEEM)
$37.51Rheem OEM direct spark ignitor with 5/16″ quick connect. Part 62-24164-03. For Rheem/Ruud furnaces with spark ignition (not hot surface).
-
62-24268-03 – CONTROL BOARD (RHEEM, OEM, GAS, HSI)
$213.30Rheem 62-24268-03 OEM control board for gas furnaces with hot surface ignition. Replaces 62-24268-01. Fits RGPJ series and similar Rheem/Ruud models.
-
62-25338-01 – CONTROL BOARD (RHEEM, OEM, GAS, SPARK IGN)
$191.32Rheem 62-25338-01 OEM control board for gas furnaces with direct spark ignition. Manages ignition, flame sensing, and blower operations in Rheem/Ruud systems.
-
62010 – 30 POUND RECOVERY TANK (NOT A2L)
$129.95Mastercool 62010 refrigerant recovery tank, 30 lb capacity. Steel construction with Y-valve design. DOT approved. Not rated for A2L refrigerants.
-
622686 – ECM BLOWER MOTOR (NORTEK, PWM, PROPRIETARY HARNESS)
$450.00Nortek 622686 ECM blower motor — 1/2 HP, 1050 RPM, 208-230V, 48-frame. Variable speed with proprietary PWM harness. Direct replacement for 622686R.
-
624775R – FURNACE GAS VALVE (1-STAGE. STANDARD, AFTERMARKET, HONEYWELL) **OFFER 36G22, IT’S CHEAPER
$142.20Honeywell 624775R single-stage standard-opening gas valve. 24 VAC. VR8215S series. Consider the 36G22 — it’s the same valve for less money.
-
626404R – DOUBLE STACK LIMIT SWITCH (L145°)
$41.93Nordyne 626404R double-pole limit switch, opens at 145°F. Dual-stack design for Nordyne, Miller, and Intertherm furnaces. Also listed as 626404.
-
626458R – DOUBLE STACK LIMIT SWITCH (L190°)
$42.58Nordyne 626458R double-pole limit switch, opens at 190°F. Dual-stack design for Nordyne, Miller, and Intertherm furnaces. Also listed as 626458.
-
63010 – 50 POUND RECOVERY TANK (NOT A2L)
$134.95Mastercool 63010 refrigerant recovery tank, 50 lb capacity. Steel construction with Y-valve design. DOT approved. Not rated for A2L refrigerants.
-
632484R – FLAME SENSOR (NORTEK)
$43.99Nortek 632484R flame sensor for Nortek and Broan furnaces. OEM replacement part. Also fits Intertherm, Miller, and Nordyne branded units.
-
65/10/440 – DUAL CAPACITOR (ROUND, MADE IN MEXICO)
$48.2565+10 MFD 440V dual run capacitor. Powers the compressor and condenser fan on larger AC systems. JARD 12862 — fits 3.5-5 ton units.
-
6505V – VS ECM – 4 PIN CONTROL
$456.061/2 HP Genteq Evergreen variable-speed ECM blower motor. 120/240V dual voltage, 4-pin control. Direct drop-in for Genteq model 3.0 ECMs. Preprogrammed with harness included.
-
6507V – VS ECM – 4 PIN CONTROL
$462.003/4 HP Genteq Evergreen variable-speed ECM blower motor. 120/240V dual voltage, 1050 RPM, 4-pin control. Direct replacement for Genteq 2.3 and 3.0 ECM motors.
-
6510V – VS ECM – 4 PIN CONTROL
$558.881 HP Genteq Evergreen variable-speed ECM blower motor. 120/240V dual voltage, 4-pin control. Direct drop-in for Genteq model 3.0 ECMs. Largest HP in the Evergreen VS line.
-
660613 – WIRE STRIPPER, CRIMPER, CUTTER
$16.98Multi-function wire stripper, crimper, and cutter. Auto-stripping action with Cr-Mo blades. Handles stripping, crimping, and cutting in one tool.
-
66753 – INDUCER MOTOR ASSEMBLY (CARRIER)
$189.19Packard 66753 inducer motor assembly for Carrier furnaces. Replaces 318984-753. Complete assembly with motor, bracket, and blower wheel — everything you need for a full swap.
-
69W43 – FLAME SENSOR (LENNOX, AFTERMARKET, DIRECT, 790-801A1)
$34.12Lennox 69W43 flame sensor replacement with 90-degree bend. Direct aftermarket fit for Lennox furnaces. Also listed as 790-801A1 and 102431-02. Single-prong Kanthal rod.
-
6DH8X1/2R10 – SCREWS (QTY – 100, DRILL POINT, #8, 1/2″ LONG, 1/4″ HEX)
$10.85#8 x 1/2″ hex head drill point screws, 100-pack. Self-drilling with 1/4″ hex drive. No pre-drilling needed for sheet metal.
-
6DH8X1/2R50 – SCREWS (QTY – 500, DRILL POINT, #8, 1/2″ LONG, 1/4″ HEX)
$20.63#8 x 1/2″ hex head drill point screws, 500-pack. Self-drilling with 1/4″ hex drive. Bulk pack for contractors and big jobs.
-
6THW8X2R25 – SCREWS (QTY – 250, TAPER POINT, #8, 2″ LONG, 1/4″ WHITE HEX)
$23.84#8 x 2″ white hex head taper point screws, 250-pack. Self-piercing with 1/4″ white painted hex head. Used for registers and grilles.
-
6THW8X2R5 – SCREWS (QTY – 50, TAPER POINT, #8, 2″ LONG, 1/4″ WHITE HEX)
$11.22#8 x 2″ white hex head taper point screws, 50-pack. Self-piercing with 1/4″ white painted hex head. For registers and grilles.
-
6THZ8X1/2R10 – SCREWS (QTY – 100, TAPER POINT, #8, 1/2″ LONG, 1/4″ HEX)
$6.96#8 x 1/2″ zinc hex head taper point screws, 100-pack. Self-piercing with 1/4″ zinc-plated hex head for sheet metal work.
-
6THZ8X1/2R50 – SCREWS (QTY – 500, TAPER POINT, #8, 1/2″ LONG, 1/4″ HEX)
$15.84#8 x 1/2″ zinc hex head taper point screws, 500-pack. Self-piercing with 1/4″ zinc-plated hex head. Bulk pack for shops and contractors.
-
7.5/440 – CAPACITOR (OVAL, MADE IN USA)
$14.837.5 MFD 440V oval run capacitor. Powers a single motor — usually the condenser fan. American-made by Titan HD. Compact oval shape fits tight spaces.
-
7.5X440 – CAPACITOR (OVAL, MADE OVERSEAS)
$11.207.5 MFD 440V oval run capacitor. Powers a single motor — usually the condenser fan. Budget-friendly TrueLine replacement for any 7.5 MFD oval cap.
-
7/8C90 – REFRIGERATION COPPER FITTING (7/8″ 90° ELBOW, LONG RADIUS)
$4.097/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
7/8C90ST – REFRIGERATION COPPER FITTING (7/8″ 90° STREET ELBOW, LONG RADIUS)
$3.507/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
7/8CC – REFRIGERATION COPPER FITTING (7/8″ COUPLING WITH STOP)
$2.557/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 7/8″ copper pipe in a straight line. Wrot copper for brazing.
-
7/8X3/4CCOUP – COPPER FITTING (REDUCER COUPLING, CxC)
$3.707/8″ x 3/4″ ACR copper reducer coupling (C x C). Connects 7/8″ and 3/4″ copper pipe directly. Wrot copper for brazing.
-
7/8X3/4CRED – COPPER FITTING (REDUCER BUSHING, FTGxC)
$3.707/8″ x 3/4″ ACR copper reducer bushing (FTG x C). Steps down from 7/8″ fitting to 3/4″ copper pipe. Wrot copper for brazing.
-
7/8X50 – COPPER REFRIGERATION TUBING (7/8″ X 50′)
$273.167/8″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Standard suction line for 3-5 ton residential AC systems.
-
70-101087-81 – INDUCER MOTOR ASSEMBLY (RHEEM, AFTERMARKET, DIRECT, 12179)
$214.04Aftermarket inducer motor assembly for Rheem/Ruud furnaces. 115V, 3000 RPM. Replaces 70-101087-81 and 70-24175-01. Complete assembly with motor, housing, and wheel.
-
70-102011-22 – FAN BLADE (2, 18″, 27°, CCW, HUB ON INTAKE)
$78.99Rheem 70-102011-22 condenser fan blade — 18″, 2-blade, 27° pitch, CCW rotation, hub on intake side. OEM replacement for Rheem and Ruud outdoor units.
-
70-20218-03 – BLOWER WHEEL (10″ x 10″, CW, CONCAVE)
$113.2210-5/8″ x 10-3/4″ clockwise blower wheel with concave blades and 1/2″ bore. OEM Rheem part. Also replaces Goodman B1368047S and Carrier LA22ZA123.
