EAFHG1425-2 – FILTER BASE (14″W x 25″D – 1″ FILTER, GAS)
$82.71EAFHG1425-2 filter base for gas furnaces, 14×25 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.
Showing 625–672 of 1291 results
-
-
EAFHG1425-6 – FILTER BASE (14″W x 25″D – 1″, 2″, or 4″ FILTER, GAS)
$91.56EAFHG1425-6 filter base for gas furnaces, 14×25 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.
-
EAFHG1625-2 – FILTER BASE (16″W x 25″D – 1″ FILTER, GAS)
$82.71EAFHG1625-2 filter base for gas furnaces, 16×25 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.
-
EAFHG1625-6 – FILTER BASE (16″W x 25″D – 1″, 2″, or 4″ FILTER, GAS)
$91.56The EAFHG1625-6 Filter Base securely houses 16″ x 25″ filters in 1″, 2″, or 4″ thicknesses for gas furnaces up to 5 tons, improving air quality and system efficiency.
-
EAFHG2025-2 – FILTER BASE (20″W x 25″D – 1″ FILTER, GAS)
$84.23EAFHG2025-2 filter base for gas furnaces, 20×25 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.
-
EAFHG2025-6 – FILTER BASE (20″W x 25″D – 1″, 2″, or 4″ FILTER, GAS)
$94.91EAFHG2025-6 filter base for gas furnaces, 20×25 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.
-
ECBFF-1 – BALL VALVE
$18.07ECBFF-1 ball valve for refrigerant hoses. 1/4″ connection, brass construction. Controls refrigerant flow during charging, recovery, and evacuation.
-
ECMPRO – ECM MOTOR TESTER
$69.84Supco ECMPRO universal ECM motor tester. 24 VAC powered with 24-inch leads, magnetic case, and short circuit protection. Tests most ECM blower motors without the furnace board.
-
EDG-2K-20C – CONDENSER WALL MOUNT BRACKET W/ CROSSBAR (1 – 2T)
$55.591-2 ton condenser wall mount bracket with crossbar by Everwell. Galvanized steel, holds mini-split or small condenser off the ground. Includes hardware.
-
EF32CW210 – FURNACE GAS VALVE (OEM, DIRECT, 1176929)
$211.37OEM Carrier/Bryant/Payne gas valve. EF32CW210 direct ignition, 24V, natural gas, 3.5″ WC, 1/2″ NPT. Replaces EF32CW206 and 36G24-618.
-
EFGC-012-YE-1010-36 – GAS PIPE (1/2 ” x 36″, YELLOW, FLEX)
$15.581/2″ x 36″ yellow flex gas connector with MIP fittings. Epoxy-coated stainless steel. Connects furnaces, water heaters, dryers, and ranges to your gas line.
-
ELECTAPE – ELECTRICAL TAPE (3/4″X60′, 7MIL)
$1.553/4″ x 60′ vinyl electrical tape, 7 mil thickness. Flame retardant and moisture resistant. Standard black electrical tape for wiring connections.
-
EM3466 – BLOWER MOTOR – FURNACE (3/4 HP, 120V, 10MFD)
$195.443/4 HP furnace blower motor, 115V, 1075 RPM, 4-speed reversible. Requires 10 MFD 370V capacitor (sold separately). Direct replacement for US Motors 55470.
-
EM3467 – BLOWER MOTOR – AIR HANDLER (3/4 HP, 240V, 10MFD)
$195.463/4 HP air handler blower motor, 208-230V, 1075 RPM, 4-speed reversible. Requires 10 MFD 370V capacitor (sold separately). The 230V version of the EM3466.
-
EZT-113 – DRAIN TRAP KIT
$17.69EZ Trap EZT-113 ClearTrap economy drain trap kit. 3/4″ transparent PVC with red watertight caps. See-through design lets you check for clogs without disassembly.
-
F017C – CONDENSER WALL MOUNT BRACKET (1 & 1.5T)
$36.121-1.5 ton condenser wall mount bracket by Everwell. Heavy-duty steel with rust-resistant coating and vibration absorbers. For mini-split outdoor units.
-
F019C – CONDENSER WALL MOUNT BRACKET (2 & 3T)
$36.602-3 ton condenser wall mount bracket by Everwell. Heavy-duty galvanized steel with epoxy coating and vibration absorbers. Pre-assembled with hardware.
-
F100F1625/U – FILTER RACK (16″ x 25″)
$132.00Honeywell F100F1625/U media air cleaner, 16×25. MERV 11 rated, captures particles down to 0.3 microns. 1,400 CFM capacity. Whole-house filtration upgrade.
-
F100F2020/U – FILTER RACK (20″ x 20″)
$132.00Honeywell F100F2020/U media air cleaner, 20×20. MERV 11 rated, captures particles down to 0.3 microns. 1,400 CFM capacity. Whole-house filtration upgrade.
-
F5000 – FLARING TOOL
$99.44SPIN F5000 flaring tool set for 1/4″ to 3/4″ copper and aluminum tubing. Drill-powered (1,800 RPM) — creates flares faster than manual flaring tools.
-
FAN04073 – FAN BLADE (3, 28″, 18°, CCW, HUB ON INTAKE)
$192.63Trane FAN04073 condenser fan blade — 28″, 3-blade, 18° pitch, CCW rotation, hub on intake side. OEM replacement for Trane and American Standard units.
-
FAN06720 – FAN BLADE (3, 23″, 26°, CCW, HUB ON INTAKE)
$163.07Trane FAN06720 condenser fan blade — 23″, 3-blade, 26° pitch, CCW rotation, hub on intake side. OEM replacement. Replaces FAN03127 and FAN04003.
-
FAV-6 – FRESH AIR INTAKE SYSTEM (6″, CONTROL & DAMPER)
$199.00Field Controls FAV-6 fresh air ventilation system. 6″ motorized damper with control unit. Brings in outside air through your existing HVAC system for better ventilation.
-
FC4031 – UNIVERSAL FAN CENTER (120V, 208V, or 240V)
$60.20Supco FC4031 universal fan center. Built-in 40VA transformer (120/208/240V to 24V) plus DPDT relay in one unit. Replaces separate transformer and relay combos.
-
FCN – WATERLESS AIR TRAP (P-TRAP UPGRADE)
$27.85Supco FCN waterless condensate trap — replaces traditional P-traps. No water to dry out, freeze, or clog with sludge. Compact design for tight spaces.
-
FCR6 – FIN COMB (8 to 20 FINS PER INCH)
$15.65Supco FCR6 fin comb ring set — 6 color-coded combs for 8 to 20 fins per inch. Straightens bent condenser and evaporator coil fins to restore airflow.
-
FDC05 – DUCT COUPLING
$3.505″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC06 – DUCT COUPLING
$3.616″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC07 – DUCT COUPLING
$3.807″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC08 – DUCT COUPLING
$4.038″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC09 – DUCT COUPLING
$4.259″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC10 – DUCT COUPLING
$4.4510″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC12 – DUCT COUPLING
$5.0312″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC14 – DUCT COUPLING
$5.4514″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC16 – DUCT COUPLING
$5.8816″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC18 – DUCT COUPLING
$9.1618″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDC20 – DUCT COUPLING
$9.1620″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
-
FDR614 – FLEX DUCT (R6, 14″ x 25′)
$116.9014″ x 25′ insulated flex duct (R6 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR616 – FLEX DUCT (R6, 16″ x 25′)
$134.5416″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR618 – FLEX DUCT (R6, 18″ x 25′)
$156.2618″ x 25′ insulated flex duct (R6 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR620 – FLEX DUCT (R6, 20″ x 25′)
$189.9220″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR810 – FLEX DUCT (R8, 10″ x 25′)
$93.0910″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR812 – FLEX DUCT (R8, 12″ x 25′)
$114.4012″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR85 – FLEX DUCT (R8, 5″ x 25′)
$64.435″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR86 – FLEX DUCT (R8, 6″ x 25′)
$66.056″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR87 – FLEX DUCT (R8, 7″ x 25′)
$70.867″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR88 – FLEX DUCT (R8, 8″ x 25′)
$77.588″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
-
FDR89 – FLEX DUCT (R8, 9″ x 25′)
$85.379″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.
