0125 – PVC CUTTING TOOL (3/8″ to 1″)
$13.19PVC cutting tool for 3/8″ to 1″ pipe. One-hand ratcheting design for clean cuts on condensate drain lines and small PVC pipes.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
Showing 1–48 of 276 results
-
-
0781-4240 – ACETYLENE REGULATOR
$114.82Victor G150-15-200R acetylene regulator. Compact single-stage design for light-duty brazing and soldering. CGA200 connection fits standard acetylene tanks.
-
0781-4241 – OXYGEN REGULATOR
$114.82Victor G150-60-540R oxygen regulator. Compact single-stage design for light-duty welding and brazing. CGA540 connection fits standard oxygen tanks.
-
08002.5 – TAPE (2.5″, METAL)
$23.652.5″ aluminum foil tape for HVAC duct sealing. UV and moisture resistant. Sticks to metal ductwork for airtight seals at joints and seams.
-
1/2BP1 – BLACK STEEL GAS PIPE (1/2″ x 1″ NIPPLE)
$1.961/2″ x 1″ black steel gas pipe close nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP1.5 – BLACK STEEL GAS PIPE (1/2″ x 1.5″ NIPPLE)
$1.961/2″ x 1.5″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP10 – BLACK STEEL GAS PIPE (1/2″ x 10″ NIPPLE)
$3.681/2″ x 10″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP12 – BLACK STEEL GAS PIPE (1/2″ x 12″ NIPPLE)
$4.531/2″ x 12″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP3 – BLACK STEEL GAS PIPE (1/2″ x 3″ NIPPLE)
$2.051/2″ x 3″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP4 – BLACK STEEL GAS PIPE (1/2″ x 4″ NIPPLE)
$2.201/2″ x 4″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP6 – BLACK STEEL GAS PIPE (1/2″ x 6″ NIPPLE)
$2.361/2″ x 6″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP8 – BLACK STEEL GAS PIPE (1/2″ x 8″ NIPPLE)
$3.031/2″ x 8″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP90 – BLACK STEEL GAS PIPE (1/2″ ELBOW)
$1.981/2″ black steel 90-degree elbow. Female NPT threads on both ends. Black malleable iron. For directional changes in gas piping.
-
1/2BP90ST – BLACK STEEL GAS PIPE (1/2″ STREET ELBOW)
$2.441/2″ black steel 90-degree street elbow. Male x Female NPT threads. Saves space by screwing directly into a fitting without a nipple.
-
1/2BPCAP – BLACK STEEL GAS PIPE (1/2″ CAP)
$1.701/2″ black steel pipe cap. Female NPT thread. Seals the open end of a gas pipe run. Black malleable iron. For capping unused gas connections.
-
1/2BPCPL – BLACK STEEL GAS PIPE (1/2″ COUPLING)
$1.891/2″ black steel pipe coupling. Female NPT threads on both ends. Joins two pieces of pipe together. Black malleable iron.
-
1/2BPTEE – BLACK STEEL GAS PIPE (1/2″ TEE)
$2.431/2″ black steel pipe tee. Female NPT threads on all three ports. For branching gas lines to multiple appliances. Black malleable iron.
-
1/2C90 – REFRIGERATION COPPER FITTING (1/2″ 90° ELBOW, LONG RADIUS)
$2.761/2″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
1/2C90ST – REFRIGERATION COPPER FITTING (1/2″ 90° STREET ELBOW, LONG RADIUS)
$2.431/2″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
1/2CC – REFRIGERATION COPPER FITTING (1/2″ COUPLING WITH STOP)
$1.761/2″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 1/2″ copper pipe in a straight line. Wrot copper for brazing.
-
1/2X50 – COPPER REFRIGERATION TUBING (1/2″ X 50′)
$137.871/2″ x 50′ soft copper refrigeration tubing. ACR (air conditioning/refrigeration) grade — clean, dehydrated, and capped. Use for suction lines and liquid lines.
-
1/4X50 – COPPER REFRIGERATION TUBING (1/4″ X 50′)
$50.761/4″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Commonly used for liquid lines in residential AC systems.
-
1/8ALLEN – WRENCH
$9.58Malco WT918G T-handle hex key, 1/8″ size, 9″ long. Vinyl cushion grip for torque. Alloy steel construction for HVAC service valve and setscrew work.
-
10001 – LEAK LOCK PIPE JOINT SEALANT (1.33oz, BLUE)
$8.94Leak Lock pipe joint sealant, 1.33 oz tube. Blue thread sealant for gas, water, air, and refrigerant connections. Flexible and chemical resistant.
-
10006 – NEEDLE NOSE PLIER
$8.496-inch needle nose pliers with serrated jaws. Reaches into tight spaces for bending wire, pulling pins, and grabbing small parts on HVAC equipment.
-
10014 – ADJUSTABLE CHANNEL WRENCH (10″)
$9.9910-inch adjustable channel wrench with precision jaws and non-slip handles. Chrome-plated for rust resistance. General-purpose HVAC and plumbing grip tool.
-
11/8X7/8CBUSH – COPPER FITTING (FTGxC)
$4.781-1/8″ to 7/8″ ACR copper reducer bushing (FTG x C). Steps down from 1-1/8″ fitting to 7/8″ copper pipe. Wrot copper for brazing.
-
1132 – PVC SOLVENT CEMENT (1/2 PINT)
$7.951/2 pint blue PVC solvent cement. Fast-setting bond for PVC pipe up to 6″ diameter. For condensate drain lines, plumbing, and irrigation.
-
15514 – JUMPER CORD (CLAMPS TO SOCKET)
$15.75Jumper cord with alligator clips on one end and a female socket on the other. Used for temporary power during HVAC and electrical diagnostics. For professional use.
-
15660 – REFRIGERANT HOSE (3/8″ HOSE, 5′ LONG)
$67.11Yellow Jacket 15660 heavy-duty 3/8″ charging and vacuum hose, 60″ (5 ft). 600 psi working pressure, 3000 psi burst. For larger systems and faster vacuum pulldown.
-
16569 – 6-IN-1 SCREWDRIVER
$5.996-in-1 multi-bit screwdriver with Phillips, slotted, and nut driver tips. One tool handles most HVAC panel screws and terminal connections.
-
1839046 – SERVICE HEX KEY ADAPTER
$7.25Hilmor service hex key adapter for 3/16″ and 5/16″ hex valves. Makes opening liquid and suction service valves quick and easy without fumbling for Allen keys.
-
19020 – QUICK COUPLER HOSE GASKET (1/4″)
$10.56Yellow Jacket 19020 quick coupler gaskets for 1/4″, 5/16″, and 1/2″ Acme hose fittings. Replacement seals to stop hose leaks. Pack of gaskets.
-
19041 – SEALRIGHT COMPLETE OVERHAUL KIT (LOW LOSS REBUILD)
$18.45Yellow Jacket 19041 SealRight 1/4″ complete overhaul kit. Rebuilds your low-loss quick couplers with new seals, springs, and o-rings. Cheaper than replacing the whole coupler.
-
19109 – SEALRIGHT FITTING (STRAIGHT, 1/4″, LOW LOSS)
$20.88Yellow Jacket 19109 SealRight 1/4″ straight low-loss fitting. Traps refrigerant automatically when you disconnect. Male flare, straight design.
-
19209 – SEALRIGHT FITTING (ELBOW, 1/4″, LOW LOSS)
$21.29Yellow Jacket 19209 SealRight 1/4″ 90-degree low-loss fitting. Traps refrigerant automatically when you disconnect. Male flare, elbow design for tight spaces.
-
1948778 – 6-IN-1 NUT DRIVER
$14.98Irwin 6-in-1 SAE nut driver. Six sizes (1/4″ to 1/2″) in one compact tool. Covers the most common nut driver sizes for HVAC sheet metal screws.
-
1948779 – EXTENDING SCREWDRIVER
$12.98Irwin 1948779 extending screwdriver. Shaft extends from 5″ to 11″ for hard-to-reach screws. Includes 5 impact bits. Handy for HVAC equipment access panels.
-
21012 – SHORT RECOVERY DRIER HOSE
$22.43Yellow Jacket 21012 PLUS II 12-inch recovery drier hose. 1/4″ with standard flare fittings. Short hose for connecting a filter drier inline during recovery.
-
21985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ STANDARD FITTING)
$98.04Yellow Jacket 21985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with standard flare fittings. Red, blue, and yellow. Double barrier construction for all refrigerants.
-
22985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ LOW LOSS FITTING)
$121.82Yellow Jacket 22985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with SealRight low-loss fittings. Red, blue, yellow. Traps refrigerant on disconnect.
-
24F – METAL FOLDING TOOL
$39.68Malco 24F metal folding tool, 24 inches long. Dual folding depths (3/8″ and 1″) for bending sheet metal edges. Heavy-duty steel for ductwork fabrication.
-
25006 – TINNING HAMMER (40oz)
$16.9040oz tinning hammer with polished striking face and wooden handle. Built for bending, seaming, and forming sheet metal ductwork in HVAC installations.
-
25985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ BALL VALVE FITTING)
$181.61Yellow Jacket 25985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with FlexFlow ball valve fittings. Red, blue, yellow. Instant shutoff at the hose end.
-
2AM-T – ACETYLENE TORCH HANDLE (QUICK CONNECT)
$81.96TurboTorch 2AM-T acetylene torch handle with quick-connect tip fitting. Extreme Swirl Technology for efficient heat distribution. The handle that most HVAC brazing tips connect to.
-
3/4C90 – REFRIGERATION COPPER FITTING (3/4″ 90° ELBOW, LONG RADIUS)
$3.843/4″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
3/4C90ST – REFRIGERATION COPPER FITTING (3/4″ 90° STREET ELBOW, LONG RADIUS)
$3.343/4″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
3/4CC – REFRIGERATION COPPER FITTING (3/4″ COUPLING WITH STOP)
$2.263/4″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 3/4″ copper pipe in a straight line. Wrot copper for brazing.
