36104 – RATCHETING PVC CUTTING TOOL
$17.69Ratcheting PVC cutter — cuts plastic pipe and tubing up to 2″ with smooth, burr-free results. Ratchet action reduces hand strain on bigger cuts.
Showing 193–240 of 1291 results
-
-
36105 – HOLE CUTTER
$47.89Adjustable hole cutter for sheet metal. Creates clean circular holes for ductwork, vents, and registers. Fits in a standard drill chuck.
-
36106 – REPLACEMENT BITS FOR 36105 (5PC)
$23.495-pack replacement bits for the 36105 adjustable hole cutter. Hardened steel for clean, burr-free cuts in sheet metal ductwork.
-
36113 – DUCT KNIFE (DOUBLE SIDED – SERRATED & STRAIGHT)
$15.15Double-sided duct knife with serrated and straight edges. Ergonomic handle and puncture-resistant sheath included. Cuts duct board, insulation, and flex duct.
-
3636-3 – EQUIPMENT PAD (36″X36″ – 3″)
$59.2536″ x 36″ x 3″ plastic equipment pad for outdoor AC condensers and heat pumps. Blow-molded, UV-resistant, and lightweight. Keeps your unit level and off the ground.
-
36C03-300 – FURNACE GAS VALVE (STANDING, FAST, 1/2″ x 3/4″)
$164.37White-Rodgers 36C03-300 standing pilot gas valve. Fast-opening, 1/2″ x 3/4″ NPT. Natural or LP gas with adjustable regulator. For older standing pilot furnaces.
-
36C03-433 – FURNACE GAS VALVE (STANDING, FAST, 3/4″)
$208.13White-Rodgers 36C03-433 standing pilot gas valve. Fast-opening, 3/4″ x 3/4″ NPT. Natural or LP gas with adjustable regulator. For larger standing pilot furnaces.
-
36G22-254 – FURNACE GAS VALVE (1/2″ x 1/2″, 1-STAGE, FAST OPEN)
$108.83Aftermarket 36G22-254 single-stage gas valve. Fast-opening, 1/2″ x 1/2″ NPT, 24 VAC. Direct replacement for Honeywell 624775R at a lower price. Huge cross-reference list.
-
36J24-214 – FURNACE GAS VALVE (1/2″ x 1/2″, 1-STAGE, SLOW OPEN)
$150.94White-Rodgers 36J24-214 single-stage gas valve. Slow-opening, 1/2″ x 1/2″ NPT, 24 VAC. Massive cross-reference list covering most major furnace brands.
-
36J54-214 – FURNACE GAS VALVE (1/2″ x 1/2″, 2-STAGE, FAST OPEN)
$197.48White-Rodgers 36J54-214 two-stage gas valve. Fast-opening, 1/2″ x 1/2″ NPT, 24 VAC. Major cross-reference covering Carrier, Goodman, Lennox, Trane, and more.
-
38013 – SCREWDRIVER SET (6+1PC, INSULATED)
$15.896-piece insulated screwdriver set rated to 1000V. Phillips and slotted tips with ergonomic handles. Required for safe electrical and HVAC work.
-
3AFUSE – FUSE
$0.893 Amp bladed ATC fuse for HVAC control boards and low-voltage circuits. Standard automotive-style blade fuse. Protects 24V thermostat circuits and control wiring.
-
3C2030CW – FAN BLADE (3, 20″, 30°, CW, HUBLESS)
$94.7720″ aluminum 3-blade condenser fan blade. 30° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.
-
3P40A120V – CONTACTOR (3 POLE, 40 RLA, 120V COIL)
$35.95Three-pole 40A contactor with 120V coil (C340B/DP401203). For 3-phase AC and commercial HVAC applications. Silver cadmium oxide contacts by Supco.
-
3P40A240V – CONTACTOR (3 POLE, 40 RLA, 240V COIL)
$39.43Three-pole 40A contactor with 240V coil (C340C/DP402403). For 3-phase AC and commercial HVAC applications. Silver cadmium oxide contacts by Supco.
-
3P40A24V – CONTACTOR (3 POLE, 40 RLA, 24V COIL)
$39.43Three-pole 40A contactor with 24V coil (C340A/DP40243). For 3-phase commercial AC and refrigeration. Silver cadmium oxide contacts by Supco.
-
3W1 – HARD START KIT (3 WIRE, 1-3 TON)
$41.20Supco 3W1 hard start kit for 1-3 ton compressors. 3-wire design with potential relay and start capacitor. Gets stubborn compressors running on hot days.
-
3W2 – HARD START KIT (3 WIRE, 3.5-5 TON)
$48.09Supco 3W2 hard start kit for 3.5-5 ton compressors. 3-wire design with potential relay and start capacitor. Built for larger residential and light commercial AC.
-
3W3 – HARD START KIT (3 WIRE, 4-5 TON)
$52.86Supco 3W3 hard start kit for 4-5 ton compressors. 3-wire design with potential relay and start capacitor. Heavy-duty option for the largest residential systems.
-
40/10/440 – DUAL CAPACITOR (ROUND, MADE IN USA)
$40.7840+10 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.
-
40/440 – CAPACITOR (ROUND, MADE IN USA)
$26.7840 MFD 440V round run capacitor. Powers a single motor — compressor or fan. American-made by Titan HD with 60,000-hour rated life.
-
40/5/440 – DUAL CAPACITOR (ROUND, MADE IN USA)
$36.7840+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.
-
40/7.5/440 – DUAL CAPACITOR (ROUND, MADE IN USA)
$37.7940+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.
-
40+10X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$28.4540+10 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
40+5X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$28.8040+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
40+7.5X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$28.6040+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
4000504 – REDUCER
$9.09Galvanized duct reducer, 5″ to 4″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000604 – REDUCER
$9.09Galvanized duct reducer, 6″ to 4″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000605 – REDUCER
$9.09Galvanized duct reducer, 6″ to 5″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000705 – REDUCER
$10.28Galvanized duct reducer, 7″ to 5″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000706 – REDUCER
$10.24Galvanized duct reducer, 7″ to 6″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000806 – REDUCER
$10.59Galvanized duct reducer, 8″ to 6″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000807 – REDUCER
$10.53Galvanized duct reducer, 8″ to 7″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000907 – REDUCER
$11.05Galvanized duct reducer, 9″ to 7″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4000908 – REDUCER
$11.05Galvanized duct reducer, 9″ to 8″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001008 – REDUCER
$11.48Galvanized duct reducer, 10″ to 8″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001009 – REDUCER
$11.48Galvanized duct reducer, 10″ to 9″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001209 – REDUCER
$12.80Galvanized duct reducer, 12″ to 9″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001210 – REDUCER
$12.89Galvanized duct reducer, 12″ to 10″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001410 – REDUCER
$14.96Galvanized duct reducer, 14″ to 10″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001412 – REDUCER
$14.96Galvanized duct reducer, 14″ to 12″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001612 – REDUCER
$19.71Galvanized duct reducer, 16″ to 12″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4001614 – REDUCER
$19.71Galvanized duct reducer, 16″ to 14″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
-
4050-11 – REFRIGERANT LEAK SEALANT & DYE (2-7.5 TON)
$75.73Nu-Calgon EasySeal 4050-11 refrigerant leak sealant with UV dye. Treats 2 to 7.5 ton systems. Works with all refrigerant types. Direct-inject installation.
-
4053501S – DRAFT INDUCER VENT KIT
$27.51Goodman 4053501S draft inducer vent kit. Includes the vent pipe and fittings for the inducer motor assembly. Use when replacing the inducer or repairing the exhaust vent connection.
-
413 – FILTER (APRILAIRE, MERV 13, 16X25)
$79.35Aprilaire 413 replacement filter. MERV 13, 16x25x4. Traps dust, pollen, mold spores, and pet dander. Fits Aprilaire 1410, 2410, 3410, and 4400 whole-house air cleaners.
-
413BOX – PLEATED FILTER (APRILAIRE REPLACEMENT, MERV 13)
$46.60Aftermarket 413BOX replacement for Aprilaire 413. MERV 13, 16x25x4. Same filtration as the OEM filter at a lower price. Fits Aprilaire 1410, 2410, 3410, and 4400.
-
42-101225-81 – FURNACE PRESSURE SWITCH (-0.35PF)
$89.45Rheem 42-101225-81 furnace pressure switch, -0.35″ WC. OEM replacement for Rheem and Ruud gas furnaces. Monitors inducer draft for safe ignition.
