3/4PVC45 – PVC FITTING (3/4″, 45° ELBOW, SCH 40)
$1.313/4″ Schedule 40 PVC 45° elbow (slip x slip). Makes a gradual 45-degree turn in HVAC condensate drain lines. Better flow than a 90° elbow when space allows.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
Showing all 16 results
-
-
3/4PVC90 – PVC FITTING (3/4″, 90° ELBOW, SCH 40)
$0.853/4″ Schedule 40 PVC 90° elbow (slip x slip). Standard fitting for making right-angle turns in HVAC condensate drain lines. Glue-joint connections.
-
3/4PVCCAP – PVC PIPE (3/4″, CAP, SCH 40, SLIP FITTING)
$0.683/4″ Schedule 40 PVC slip cap. Glues onto the end of 3/4″ PVC pipe to seal it off. Used on drain line dead ends, test points, and unused connections.
-
3/4PVCCPL – PVC FITTING (3/4″, COUPLING, SCH 40)
$0.653/4″ Schedule 40 PVC coupling (slip x slip). Joins two pieces of 3/4″ PVC pipe end-to-end. Glue-joint connection for condensate drain line repairs and extensions.
-
3/4PVCFADAP – PVC PIPE – FEMALE ADAPTOR (SLIP x FPT, 3/4″)
$1.043/4″ Schedule 40 PVC female adapter (slip x FPT). Transitions from glue-joint PVC to a threaded fitting. Used on HVAC drain lines, drain pans, and cleanouts.
-
3/4PVCMADAP – PVC FITTING – NO GASKET/NUT (3/4″, THREADED MALE ADAPTOR, SCH 40)
$1.173/4″ Schedule 40 PVC male adapter (slip x MPT). Transitions from glue-joint PVC to a male threaded connection. No gasket or nut included — threaded end only.
-
3/4PVCSTICK – PVC PIPE (3/4″ x 10′, SCH 40)
$6.293/4″ x 10′ Schedule 40 PVC pipe. Standard for HVAC condensate drain lines. Glue-joint connections. Cut it to length on-site.
-
3/4PVCTEE – PVC FITTING (3/4″, TEE, SCH 40)
$1.243/4″ Schedule 40 PVC tee (slip x slip x slip). Creates a 90° branch connection in HVAC drain lines. Commonly used for cleanout access or splitting a drain run.
-
3/4PVCTHREADEDCAP – PVC PIPE (THREADED CAP, 3/4″, SCH40)
$1.633/4″ Schedule 40 PVC threaded cap (female pipe thread). Screws onto any 3/4″ male threaded fitting to seal the end. Used on drain line cleanouts and test ports.
-
3/4PVCTRAP – PVC FITTING (3/4″, TRAP, SCH 40)
$2.823/4″ Schedule 40 PVC P-trap (slip x slip). Standard condensate drain trap for HVAC systems. Holds water to create an air seal and prevent air from blowing through the drain line.
-
6-1 – PVC DRAIN PAN FITTING (RUBBER GASKET & METAL NUT)
$4.316-1 PVC drain pan fitting with rubber gasket and metal nut, 3/4″ slip. Connects your drain pan to the condensate line. Schedule 40 PVC — won’t leak if installed right.
-
EZT-113 – DRAIN TRAP KIT
$17.69EZ Trap EZT-113 ClearTrap economy drain trap kit. 3/4″ transparent PVC with red watertight caps. See-through design lets you check for clogs without disassembly.
-
FCN – WATERLESS AIR TRAP (P-TRAP UPGRADE)
$27.85Supco FCN waterless condensate trap — replaces traditional P-traps. No water to dry out, freeze, or clog with sludge. Compact design for tight spaces.
-
JV1 – CONDENSATE CLEANOUT VALVE
$17.99Supco JV1 condensate cleanout valve. Installs inline on 3/4″ drain lines — open it to flush the line or attach a drain gun. Easy maintenance access point.
-
SP20245 – CONCENTRIC VENT KIT (3″)
$78.63Rheem SP20245 concentric vent kit, 3″ diameter. For condensing tankless water heaters. Combines intake and exhaust in one wall penetration. Simplifies installation.
-
SP20897 – CONCENTRIC VENT KIT (2″)
$52.56Rheem SP20897 concentric vent kit, 2″ diameter. For condensing tankless water heaters. Combines intake and exhaust in one wall penetration. Simplifies installation.
