1P32A24V – CONTACTOR (SCREW TERMINALS)
$30.70Rheem 42-109499-24 single-pole 32A contactor with 24V coil and screw terminals. OEM replacement for Rheem and Ruud AC condensers.
Showing all 48 results
-
-
42-105601-29 – FURNACE PRESSURE SWITCH (-0.20PF)
$34.21Rheem 42-105601-29 furnace pressure switch, -0.20″ WC. OEM Rheem part that also cross-references to Carrier HK06WC090. Works in both Rheem and Carrier furnaces.
-
42-107430-03 – CIRCUIT BREAKER (60A, DIN RAIL, LUG/LUG)
$43.88Rheem 42-107430-03 circuit breaker, 60A, 2-pole, 230V, DIN rail mount, lug/lug connections. Provides overcurrent protection inside the HVAC equipment cabinet.
-
42-22692-06 – DOOR INTERLOCK SWITCH (RHEEM, YORK)
$21.99Rheem 42-22692-06 furnace door safety switch. SPST normally open, push-button style. Shuts off the furnace when the access panel is removed. Also fits York.
-
42-23114-06 – RELAY (24 VAC COIL)
$19.81Rheem 42-23114-06 fan relay. 24V SPDT. OEM replacement for Rheem and Ruud furnaces and air handlers. Controls blower fan on/off switching.
-
42-23116-07 – HEAT SEQUENCER (TPST)
$37.1624V TPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Triple-pole single-throw for staging three circuits on timed delay.
-
42-23116-09 – HEAT SEQUENCER (TPST)
$40.2724V TPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Triple-pole single-throw for staging three circuits. Different timing than 42-23116-07.
-
42-24194-82 – FURNACE PRESSURE SWITCH (-0.30PF)
$56.73Rheem 42-24194-82 furnace pressure switch, -0.30″ WC. OEM for Rheem and Ruud furnaces. Also listed as 42-106257-01. Monitors inducer draft for safe operation.
-
425097K – CIRCUIT BREAKER (LINE – LUG/LOAD – QUICK CONNECT, DIN RAIL, 60A)
$60.02Rheem 425097 circuit breaker, 60A, 2-pole, DIN rail mount, lug-to-quick-connect terminals. Internal equipment breaker for Rheem/Ruud heat pumps and air handlers.
-
45-100834-80 – COMPRESSOR PLUG (COPELAND, 10 AWG, 6′)
$35.33Copeland compressor wiring harness, 10 AWG, 6-foot lead. Molded plug connects to the compressor terminals. Rheem OEM part 45-100834-80.
-
45-107231-02 – COMPRESSOR PLUG (LG)
$36.76LG compressor wiring harness. Molded plug connects to the compressor terminals. Rheem OEM part 45-107231-02. Also cross-references 104162-03 and 13U63.
-
47-100436-02 – CONTROL BOARD – X13 ECM (RHEEM, AIR HANDLER)
$80.10Rheem 47-100436-02 control board for air handlers with X13 ECM motors. OEM replacement — also cross-references 47-102077-02, 47-102077-05, and 48X21-811.
-
47-100436-05 – CONTROL BOARD – PSC MOTOR (RHEEM, AIR HANDLER)
$76.92Rheem 47-100436-05 control board for air handlers with PSC motors. OEM replacement for Rheem and Ruud air handlers. Manages blower motor speed and timing.
-
47-102684-204 – DEFROST CONTROL BOARD
$107.95Rheem 47-102684-204 defrost control board for heat pumps. Manages defrost timing to prevent ice buildup on outdoor coil. OEM Rheem/Ruud replacement.
-
47-102684-83 – DEFROST CONTROL BOARD WITH SENSORS (RHEEM)
$113.38Rheem 47-102684-83 defrost control board kit with sensors. Manages defrost timing on Rheem/Ruud heat pumps. Includes defrost sensors.
-
47-104990-04 – HIGH TEMPERATURE LIMIT SWITCH (3″, ODD BASE, L150°)
$34.19Rheem 47-104990-04 high limit switch, 3-inch insertion, odd base, opens at 150°F. Auto reset. OEM replacement for Rheem and Ruud furnaces.
-
47-22860-01 – AUTO LIMIT SWITCH WITH ANTICIPATOR (RHEEM, L105°)
$34.34Rheem 47-22860-01 auto reset limit switch with built-in anticipator, opens at 105°F. OEM for Rheem and Ruud furnaces. Low-temp cutoff for heat pump applications.
-
47-22861-03 – LIMIT SWITCH (RHEEM, MICRO, WIDE MOUNT, L250°)
$15.93Rheem 47-22861-03 manual reset limit switch, opens at 250°F. Wide mount, micro size. OEM flame rollout switch for Rheem and Ruud furnaces.
-
47-25349-01K – HIGH TEMPERATURE LIMIT SWITCH (3″, ODD BASE, L160°)
$27.90Rheem 47-25349-01 high limit switch, 3-inch insertion, odd base, opens at 160°F. Auto reset. Kit version (47-25349-01K). OEM for Rheem and Ruud furnaces.
-
62-105217-01 – CONTROL BOARD (RHEEM, OEM, GAS, SPARK IGN)
$218.71Rheem 62-105217-01 OEM control board for gas furnaces with spark ignition. Manages ignition, flame sensing, and blower operations in Rheem/Ruud systems.
-
62-23543-01 – FLAME SENSOR (RHEEM)
$20.87Rheem 62-23543-01 flame sensor replacement. Fits Rheem and Ruud furnace models including RGPH and UGPH series. Aftermarket direct fit, listed as FLS301.
-
62-24164-01 – SPARK IGNITOR (ROUND PIN, RHEEM)
$36.64Rheem OEM direct spark ignitor with round pin connector. Part 62-24164-01. For Rheem/Ruud furnaces with spark ignition (not hot surface).
-
62-24164-03 – SPARK IGNITOR (5/16″ QUICK CONNECT, RHEEM)
$37.51Rheem OEM direct spark ignitor with 5/16″ quick connect. Part 62-24164-03. For Rheem/Ruud furnaces with spark ignition (not hot surface).
-
62-25338-01 – CONTROL BOARD (RHEEM, OEM, GAS, SPARK IGN)
$191.32Rheem 62-25338-01 OEM control board for gas furnaces with direct spark ignition. Manages ignition, flame sensing, and blower operations in Rheem/Ruud systems.
-
70-101087-81 – INDUCER MOTOR ASSEMBLY (RHEEM, AFTERMARKET, DIRECT, 12179)
$214.04Aftermarket inducer motor assembly for Rheem/Ruud furnaces. 115V, 3000 RPM. Replaces 70-101087-81 and 70-24175-01. Complete assembly with motor, housing, and wheel.
-
70-20218-03 – BLOWER WHEEL (10″ x 10″, CW, CONCAVE)
$113.2210-5/8″ x 10-3/4″ clockwise blower wheel with concave blades and 1/2″ bore. OEM Rheem part. Also replaces Goodman B1368047S and Carrier LA22ZA123.
-
70-20602-01 – BLOWER WHEEL (11″ x 10″, CW, CONCAVE)
$123.2811″ x 10″ clockwise blower wheel with concave blades and 1/2″ bore. Rheem 70-20602-01 cross-reference. Also replaces Goodman B1368000S and Carrier S1-02634501000.
-
70-24157-03 – INDUCER MOTOR (RHEEM, AFTERMARKET, DIRECT, FB-RFB241)
$178.04Aftermarket inducer motor for Rheem/Ruud furnaces. 120V, 3000 RPM, 1/30 HP. Replaces 70-24157-03. Right-side discharge. Complete assembly.
-
AE-61698-82 – SCREW SHELL MOTOR MOUNT KIT (4-ARM, RHEEM)
$38.18Rheem AE-61698-82 screw shell motor mount kit, 4-arm. OEM replacement for 48-frame blower motors in Rheem and Ruud furnaces and air handlers.
-
R801T0503A14UHSNAS- FURNACE (50K BTU, 3 TON, 14″, SEER2)
Call for PriceRheem R801T0503A14UHSNAS gas furnace, 50,000 BTU, 80% AFUE, 14″ cabinet. Constant torque ECM blower motor with PlusOne diagnostics. Upflow/horizontal install. SEER2 compliant.
-
R801T0754A17UHSNAS – FURNACE (75K BTU, 4 TON, 17″, SEER2)
Call for PriceRheem R801T0754A17UHSNAS gas furnace, 75,000 BTU, 80% AFUE, 17″ cabinet. Constant torque ECM blower motor with PlusOne diagnostics. Upflow/horizontal install. SEER2 compliant.
-
R801T0754A21UHSNAS – FURNACE (75K BTU, 4 TON, 21″, SEER2)
Call for PriceRheem R801T0754A21UHSNAS gas furnace, 75,000 BTU, 80% AFUE, 21″ cabinet. Constant torque ECM blower motor with PlusOne diagnostics. Upflow/horizontal install. SEER2 compliant.
-
R801T1005A21UHSNAS – FURNACE (100K BTU, 5 TON, 21″, SEER2)
Call for PriceRheem R801T1005A21UHSNAS gas furnace, 100,000 BTU, 80% AFUE, 21″ cabinet. Constant torque ECM blower motor with PlusOne diagnostics. Upflow/horizontal install. SEER2 compliant.
-
RA14AZ18AJ1NA – CONDENSER (1.5 TON, R410A, 14 SERIES, SEER2)
Call for PriceRheem RA14AZ18AJ1NA 1.5-ton AC condenser. 14.3 SEER2, R-410A, single-stage scroll compressor. Pre-charged refrigerant. 10-year registered warranty.
-
RCFZ6021STAAMC – EVAPORATOR COIL (5 TON, R410A, 21″, SEER2)
Call for PriceRheem RCFZ6021STAAMC evaporator coil, 5-ton, R-410A, 21″ cabinet width. Cased coil for upflow/downflow applications. SEER2 compliant.
-
RH1PZ2417STANNJ – AIR HANDLER (2 TON, R410A, 17″, SEER2)
Call for PriceRheem RH1PZ2417STANNJ 2-ton air handler. 17″ width, R-410A compatible, PSC motor, SEER2 compliant. Pairs with Rheem RA14AZ24 condenser for a complete system.
-
RH1PZ3617STANNJ – AIR HANDLER (3 TON, R410A, 17″, SEER2)
Call for PriceRheem RH1PZ3617STANNJ 3-ton air handler. 17″ width, R-410A compatible, PSC motor, SEER2 compliant. Pairs with Rheem RA14AZ36 condenser for a complete system.
-
RH2TZ3617STANNJ – AIR HANDLER (3 TON, R410A, 17″, SEER2)
Call for PriceRheem RH2TZ3617STANNJ 3-ton air handler with Constant Torque ECM motor. 17″ width, R-410A, SEER2 compliant. More efficient and quieter than PSC models.
-
RP14AZ24AJ2NA – HEAT PUMP CONDENSER (2 TON, R410A, 2-STAGE, 14 SERIES, SEER2)
Call for PriceRheem RP14AZ24AJ2NA heat pump condenser, 2-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.
-
RP14AZ30AJ2NA – HEAT PUMP CONDENSER (2.5 TON, R410A, 2-STAGE, 14 SERIES, SEER2)
Call for PriceRheem RP14AZ30AJ2NA heat pump condenser, 2.5-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.
-
RP14AZ36AJ2NA – HEAT PUMP CONDENSER (3 TON, R410A, 2-STAGE, 14 SERIES, SEER2)
Call for PriceRheem RP14AZ36AJ2NA heat pump condenser, 3-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.
-
RP14AZ42AJ2NA – HEAT PUMP CONDENSER (3.5 TON, R410A, 2-STAGE, 14 SERIES, SEER2)
Call for PriceRheem RP14AZ42AJ2NA heat pump condenser, 3.5-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.
-
RP14AZ48AJ2NA – HEAT PUMP CONDENSER (4 TON, R410A, 2-STAGE, 14 SERIES, SEER2)
Call for PriceRheem RP14AZ48AJ2NA heat pump condenser, 4-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.
-
RP14AZ60AJ2NA – HEAT PUMP CONDENSER (5 TON, R410A, 2-STAGE, 14 SERIES, SEER2)
Call for PriceRheem RP14AZ60AJ2NA heat pump condenser, 5-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.
-
RXBH-1724A10J-BR – HEAT KIT (RHEEM, 10 KW, SEER2)
Call for PriceRheem 10 kW electric heat kit for SEER2 air handlers. Part #RXBH-1724A10J-BR. Includes circuit breaker, smart plug, and legacy board adapter.
-
RXBH-1724A15J-BR – HEAT KIT (RHEEM, 15 KW, SEER2)
Call for PriceRheem 15 kW electric heat kit for SEER2 air handlers. Part #RXBH-1724A15J-BR. Includes circuit breaker, smart plug, and legacy board adapter.
-
RXBH-24A20J-BR – HEAT KIT (RHEEM, 20 KW, SEER2)
Call for PriceRheem 20 kW electric heat kit for SEER2 air handlers. Part #RXBH-24A20J-BR. Includes built-in circuit breaker and nickel-chromium elements.
-
WH2TZ6024STANNJ – AIR HANDLER (5 TON, R410A, 24″, SEER2)
$1,635.02Rheem RH2TZ6024STANNJ 5-ton air handler. Constant Torque ECM motor, R-410A compatible, SEER2 compliant. 24″ wide cabinet with multiple installation options.
