1/2CONDUIT – NON-METALLIC CONDUIT BY FOOT (100′ PER ROLL)
$1.451/2″ liquid-tight non-metallic conduit, sold by the foot (100′ per roll). Flexible PVC for protecting AC wiring outdoors. Moisture and UV resistant.
Showing all 23 results
-
-
1/2WHIP – ELECTRICAL WHIP (6′, #10)
$23.336′ electrical whip with #10 gauge wire and 1/2″ liquid-tight non-metallic conduit. Connects your AC disconnect to the condenser. Pre-wired and ready to install.
-
15514 – JUMPER CORD (CLAMPS TO SOCKET)
$15.75Jumper cord with alligator clips on one end and a female socket on the other. Used for temporary power during HVAC and electrical diagnostics. For professional use.
-
1836-3 – EQUIPMENT PAD (18″X36″ – 3″)
$38.8618″ x 36″ x 3″ plastic equipment pad for mini-splits, small condensers, or commercial equipment. Blow-molded, UV-resistant, weatherproof.
-
3/4CONDUIT – NON-METALLIC CONDUIT BY FOOT (100′ PER ROLL)
$1.803/4″ liquid-tight non-metallic conduit, sold by the foot (100′ per roll). Flexible PVC for protecting AC wiring outdoors. Moisture and UV resistant.
-
3/4WHIP – ELECTRICAL WHIP (6′, #8)
$28.826′ electrical whip with #8 gauge wire and 3/4″ liquid-tight non-metallic conduit. Connects your AC disconnect to the condenser. Pre-wired and ready to install.
-
3030-3 – EQUIPMENT PAD (30″X30″ – 3″)
$47.7530″ x 30″ x 3″ plastic equipment pad for outdoor AC units and heat pumps. Blow-molded, UV-resistant, lightweight. Keeps your condenser level and off the dirt.
-
36105 – HOLE CUTTER
$47.89Adjustable hole cutter for sheet metal. Creates clean circular holes for ductwork, vents, and registers. Fits in a standard drill chuck.
-
36106 – REPLACEMENT BITS FOR 36105 (5PC)
$23.495-pack replacement bits for the 36105 adjustable hole cutter. Hardened steel for clean, burr-free cuts in sheet metal ductwork.
-
36113 – DUCT KNIFE (DOUBLE SIDED – SERRATED & STRAIGHT)
$15.15Double-sided duct knife with serrated and straight edges. Ergonomic handle and puncture-resistant sheath included. Cuts duct board, insulation, and flex duct.
-
3636-3 – EQUIPMENT PAD (36″X36″ – 3″)
$59.2536″ x 36″ x 3″ plastic equipment pad for outdoor AC condensers and heat pumps. Blow-molded, UV-resistant, and lightweight. Keeps your unit level and off the ground.
-
42511 – INSULATION TAPE (2″X30′)
$8.992″ x 30′ self-adhesive insulation tape. Foam tape that prevents condensation on cold pipes and ducts. For HVAC, plumbing, and refrigeration lines.
-
91604-2 – LOCKING REFRIGERANT CAPS (2 PACK, SILVER)
$18.80Locking refrigerant caps (2-pack, silver) for 1/4″ service valve ports. Tamper-resistant to prevent refrigerant theft and unauthorized access. Fits R-22 and R-410A.
-
91605 – LOCKING CAP MULTI- KEY
$18.57Universal locking cap multi-key. Opens SHIELD, NOVENT, and C&D locking caps. Includes magnetic tip and valve core remover. One key for multiple lock brands.
-
COILBRUSH – COIL BRUSH
$4.003″ nylon coil brush for cleaning condenser and evaporator coils. Loosens dirt, dust, and debris between fins without bending them. Basic HVAC maintenance tool.
-
ELECTAPE – ELECTRICAL TAPE (3/4″X60′, 7MIL)
$1.553/4″ x 60′ vinyl electrical tape, 7 mil thickness. Flame retardant and moisture resistant. Standard black electrical tape for wiring connections.
-
HPR-6 – HEAT PUMP RISER (6″)
$4.196″ heat pump riser. Lifts your outdoor unit off the equipment pad to prevent snow, ice, and flood damage. Fits most residential condensers and heat pumps.
-
PSWB – NYLON DUCT HANGING STRAP (1.75″x300′)
$9.851.75″ x 300′ nylon duct hanging strap. Supports flex duct runs in attics and crawlspaces. UV-resistant, won’t rust or cut into insulation like metal strap.
-
SE-CORK – CORK TAPE (2″X30′)
$15.952″ x 30′ self-adhesive cork tape for pipe insulation. Prevents condensation on cold pipes. Flexible and easy to wrap around bends and fittings.
-
WNB – WIRE NUT (BLUE, 100CT)
$5.09Blue wire nuts, 100-count bag. Twist-on wire connectors for 22-14 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
-
WNO – WIRE NUT (ORANGE, 100CT)
$5.89Orange wire nuts, 100-count bag. Twist-on wire connectors for 22-14 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
-
WNR – WIRE NUT (RED, 100CT)
$8.99Red wire nuts, 100-count bag. Twist-on wire connectors for 14-6 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
-
WNY – WIRE NUT (YELLOW, 100CT)
$6.79Yellow wire nuts, 100-count bag. Twist-on wire connectors for 18-10 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.
