0125 – PVC CUTTING TOOL (3/8″ to 1″)
$13.19PVC cutting tool for 3/8″ to 1″ pipe. One-hand ratcheting design for clean cuts on condensate drain lines and small PVC pipes.
Product images are representative. Always verify compatibility with your model number before visiting us in store.
Showing 1–48 of 1291 results
-
-
0130F00008 – IGNITOR (GOODMAN, AFTERMARKET, DIRECT, SSN084KS)
$63.21Silicon nitride ignitor for Goodman/Amana furnaces. 120V. Replaces 0130F00008. Direct replacement — no modification needed.
-
0130F00010 – FLAME SENSOR (GOODMAN, FACTORY)
$22.54Goodman 0130F00010 flame sensor, factory OEM part. Fits Goodman and Amana furnaces including GMS80805CN and GMVC80805CN series. Also replaces B1172606.
-
0130F00038S – AUTO LIMIT SWITCH (MICRO, LARGE BASE, L120°)
$19.64Goodman/Amana 0130F00038S auto reset limit switch, opens at 120°F. Large base, micro size. Direct OEM replacement — also crosses to B13701-13 and L45-224.
-
0130F00504 – FURNACE PRESSURE SWITCH (-0.60PF)
$37.04Goodman 0130F00504 furnace pressure switch, -0.60″ WC. OEM replacement for Goodman and Amana furnaces. Also cross-references B1370142.
-
0130F00505 – FURNACE PRESSURE SWITCH (-0.70PF)
$36.49Goodman 0130F00505 furnace pressure switch, -0.70″ WC. Fits Goodman GMS80905CN series and others. Also replaces B1370158, 10727923, and 632432R.
-
0130F00508 – FURNACE DUAL PRESSURE SWITCH (-0.55 PF & -0.30 PF)
$53.18Goodman 0130F00508 dual furnace pressure switch, -0.55″ and -0.30″ WC. Two-stage switch for Goodman, Amana, and Janitrol furnaces with two-stage inducer motors.
-
0130M00138S – TRANSFORMER (240V, 40VA, PF40224)
$35.86Goodman 0130M00138S transformer, 208/240V to 24V, 40VA. Steps down line voltage for the control circuit. Direct OEM replacement for Goodman/Amana air handlers and furnaces.
-
0130M00140S – TRANSFORMER (120V, 40VA, PF40115)
$42.92Goodman 0130M00140S transformer, 120V to 24V, 40VA. Steps down line voltage to 24V for the thermostat and control circuit. Direct OEM replacement for Goodman/Amana.
-
0130M00243 – DOOR INTERLOCK SWITCH (GOODMAN)
$19.40Goodman 0130M00243 furnace door safety switch. Kills power when the access panel is removed. OEM replacement for multiple Goodman/Amana furnace models.
-
0131G00000PS – DRAFT INDUCER MOTOR (GOODMAN)
$263.00Goodman OEM draft inducer motor. 120V, 3000 RPM. Direct replacement part 0131G00000PS. OEM quality for Goodman and Amana furnaces.
-
0131M00002PSP – DRAFT INDUCER MOTOR (GOODMAN)
$185.56Goodman OEM draft inducer motor. 115V, 3000 RPM. Replaces B4059001, B4059003, and 119276-00SP. Fits GMS80905CN and other Goodman 80% furnaces.
-
013323-01 – BLOWER WHEEL (10″ x 9″, CW, CONVEX)
$158.0110″ x 9″ clockwise blower wheel with convex blades and 1/2″ bore. OEM Lennox part. G90 galvanized steel. Also sold as Morrison BW44005.
-
0151R00071SP – REVERSING VALVE W/ SOLENOID COIL & DRIER (7/8″ x 1/2″)
$160.58Goodman reversing valve with 24V solenoid coil and bi-flow filter drier. 7/8″ x 1/2″ connections. Complete assembly for heat pump systems.
-
0502025 – JOHNSON BOX
$80.12Johnson Box filter rack, 20×25. Solid metal sides with built-in duct connections — mounts inline or at the air handler. Holds a standard 20×25 filter.
-
0511625 – REX RACK
$69.89Rex Rack filter rack, 16×25. Mounts between ductwork and your air handler or furnace for horizontal installations. Holds a standard 16×25 filter. Built-in duct flange.
-
0512025 – REX RACK (DOOR ON 20″)
$69.62Rex Rack filter rack, 20×25 with access door on the 20″ side. Mounts between ductwork and your air handler for horizontal installations. Holds a standard 20×25 filter.
-
0781-4240 – ACETYLENE REGULATOR
$114.82Victor G150-15-200R acetylene regulator. Compact single-stage design for light-duty brazing and soldering. CGA200 connection fits standard acetylene tanks.
-
0781-4241 – OXYGEN REGULATOR
$114.82Victor G150-60-540R oxygen regulator. Compact single-stage design for light-duty welding and brazing. CGA540 connection fits standard oxygen tanks.
-
08002.5 – TAPE (2.5″, METAL)
$23.652.5″ aluminum foil tape for HVAC duct sealing. UV and moisture resistant. Sticks to metal ductwork for airtight seals at joints and seams.
-
1/2BP1 – BLACK STEEL GAS PIPE (1/2″ x 1″ NIPPLE)
$1.961/2″ x 1″ black steel gas pipe close nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP1.5 – BLACK STEEL GAS PIPE (1/2″ x 1.5″ NIPPLE)
$1.961/2″ x 1.5″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP10 – BLACK STEEL GAS PIPE (1/2″ x 10″ NIPPLE)
$3.681/2″ x 10″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP12 – BLACK STEEL GAS PIPE (1/2″ x 12″ NIPPLE)
$4.531/2″ x 12″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP3 – BLACK STEEL GAS PIPE (1/2″ x 3″ NIPPLE)
$2.051/2″ x 3″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP4 – BLACK STEEL GAS PIPE (1/2″ x 4″ NIPPLE)
$2.201/2″ x 4″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP6 – BLACK STEEL GAS PIPE (1/2″ x 6″ NIPPLE)
$2.361/2″ x 6″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP8 – BLACK STEEL GAS PIPE (1/2″ x 8″ NIPPLE)
$3.031/2″ x 8″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP90 – BLACK STEEL GAS PIPE (1/2″ ELBOW)
$1.981/2″ black steel 90-degree elbow. Female NPT threads on both ends. Black malleable iron. For directional changes in gas piping.
-
1/2BP90ST – BLACK STEEL GAS PIPE (1/2″ STREET ELBOW)
$2.441/2″ black steel 90-degree street elbow. Male x Female NPT threads. Saves space by screwing directly into a fitting without a nipple.
-
1/2BPCAP – BLACK STEEL GAS PIPE (1/2″ CAP)
$1.701/2″ black steel pipe cap. Female NPT thread. Seals the open end of a gas pipe run. Black malleable iron. For capping unused gas connections.
-
1/2BPCPL – BLACK STEEL GAS PIPE (1/2″ COUPLING)
$1.891/2″ black steel pipe coupling. Female NPT threads on both ends. Joins two pieces of pipe together. Black malleable iron.
-
1/2BPTEE – BLACK STEEL GAS PIPE (1/2″ TEE)
$2.431/2″ black steel pipe tee. Female NPT threads on all three ports. For branching gas lines to multiple appliances. Black malleable iron.
-
1/2C90 – REFRIGERATION COPPER FITTING (1/2″ 90° ELBOW, LONG RADIUS)
$2.761/2″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
1/2C90ST – REFRIGERATION COPPER FITTING (1/2″ 90° STREET ELBOW, LONG RADIUS)
$2.431/2″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
1/2CC – REFRIGERATION COPPER FITTING (1/2″ COUPLING WITH STOP)
$1.761/2″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 1/2″ copper pipe in a straight line. Wrot copper for brazing.
-
1/2CONDUIT – NON-METALLIC CONDUIT BY FOOT (100′ PER ROLL)
$1.451/2″ liquid-tight non-metallic conduit, sold by the foot (100′ per roll). Flexible PVC for protecting AC wiring outdoors. Moisture and UV resistant.
-
1/2WHIP – ELECTRICAL WHIP (6′, #10)
$23.336′ electrical whip with #10 gauge wire and 1/2″ liquid-tight non-metallic conduit. Connects your AC disconnect to the condenser. Pre-wired and ready to install.
-
1/2X50 – COPPER REFRIGERATION TUBING (1/2″ X 50′)
$137.871/2″ x 50′ soft copper refrigeration tubing. ACR (air conditioning/refrigeration) grade — clean, dehydrated, and capped. Use for suction lines and liquid lines.
-
1/4X50 – COPPER REFRIGERATION TUBING (1/4″ X 50′)
$50.761/4″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Commonly used for liquid lines in residential AC systems.
-
1/8ALLEN – WRENCH
$9.58Malco WT918G T-handle hex key, 1/8″ size, 9″ long. Vinyl cushion grip for torque. Alloy steel construction for HVAC service valve and setscrew work.
-
10/440 – CAPACITOR (OVAL, MADE IN USA)
$15.4910 MFD 440V oval run capacitor. Powers a single motor — usually the condenser fan. American-made by Titan HD. Compact oval shape fits tight spaces.
-
10+10X440 – DUAL CAPACITOR (MADE OVERSEAS)
$26.0110+10 MFD 370V dual run capacitor. Oval shape. Powers two motors — common in heat pumps and package units where two small motors need separate capacitors.
-
10001 – LEAK LOCK PIPE JOINT SEALANT (1.33oz, BLUE)
$8.94Leak Lock pipe joint sealant, 1.33 oz tube. Blue thread sealant for gas, water, air, and refrigerant connections. Flexible and chemical resistant.
-
10006 – NEEDLE NOSE PLIER
$8.496-inch needle nose pliers with serrated jaws. Reaches into tight spaces for bending wire, pulling pins, and grabbing small parts on HVAC equipment.
-
10014 – ADJUSTABLE CHANNEL WRENCH (10″)
$9.9910-inch adjustable channel wrench with precision jaws and non-slip handles. Chrome-plated for rust resistance. General-purpose HVAC and plumbing grip tool.
-
1010775R – FURNACE PRESSURE SWITCH (2 HOSE, -0.20)
$53.58Nordyne 1010775R furnace pressure switch, -0.20″ WC, two hose ports. Fits Nordyne, Intertherm, and Miller furnaces. Also listed as 632453.
-
1013833 – INDUCER MOTOR ASSEMBLY (ICP, AFTERMARKET, DIRECT, FB-RFB383)
$150.70Aftermarket inducer motor assembly for ICP/Heil/Tempstar furnaces. 115V, 1.6A. Replaces 1013833. Complete assembly with motor, housing, and wheel.
