60/440 - CAPACITOR (ROUND, MADE IN USA)
60/440 – CAPACITOR (ROUND, MADE IN USA)
Bring the old cap in — we bench-test it free at the counter, and you'll know in two minutes whether it actually failed. Match the MFD exactly; voltage can go up (440V replaces 370V) but never down.
10226 Plano Rd, Suite 104, Dallas TX 75238
Questions? Call or text (214) 340-9421
Mon–Fri 10 am – 7 pm | Sat 10 am – 3 pm
If your AC won’t start, hums but doesn’t kick on, or runs but won’t cool, a bad capacitor is the most common cause. This 60 MFD round cap powers a single motor — compressor or condenser fan. Replace when the motor hums but won’t kick on.
Replaces: Universal — matches by MFD and voltage.
Fits: Fits most residential HVAC systems using this value. Bring your old cap or model number — we match at the counter.
Need help? See our AC Not Cooling Troubleshooting Guide or Capacitor Cross-Reference Chart.
In stock at Open To Public HVAC Parts in Dallas. We test parts at the counter before you buy. Call or text (214) 340-9421.
Specs
- Capacitance60 MFD
- Voltage440V (compatible with lower-voltage applications)
- Tolerance±6%
- Frequency50/60 Hz
- TypeSingle-run capacitor
- ShapeRound
- TerminalsQuick-connect
- UL ListedYes
- OriginUSA-made
Cross-reference numbers
This part replaces the following OEM and aftermarket numbers:
- 12753
- 60440
- CAP-60440R
- CAP600000440
- CR60X440R
- P291-6004R
- SA2219
- TITANHDPRCFD
- TP-CAP-60440R
Not sure if your number matches? Call (214) 340-9421 or bring the old part in — bench-testing is free.
Fits these models
- MARS12XXXSERIES
How do I know if my run capacitor is bad?
The motor it powers (fan or blower) won't start, hums but doesn't spin, runs slow, or trips on overload. We bench-test these free at the counter — bring it in.
Can I use a higher MFD rating?
No. Match MFD exactly to the motor's data plate. Higher MFD over-amps the windings and shortens motor life. Voltage rating can go UP (440V replaces 370V) but never down.
Does shape (oval vs round) matter?
Electrically no — same value works in either shape. Fitment in your cap bracket might. Bring the old one in and we'll match the form factor.
Do I need to discharge it before removing?
Yes — even an "off" cap holds 240V+ that bites hard. Short the terminals with an insulated screwdriver for 5 seconds before disconnecting.




