1/2BP1 – BLACK STEEL GAS PIPE (1/2″ x 1″ NIPPLE)
$1.961/2″ x 1″ black steel gas pipe close nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
Showing 1–48 of 67 results
-
-
1/2BP1.5 – BLACK STEEL GAS PIPE (1/2″ x 1.5″ NIPPLE)
$1.961/2″ x 1.5″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP10 – BLACK STEEL GAS PIPE (1/2″ x 10″ NIPPLE)
$3.681/2″ x 10″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP12 – BLACK STEEL GAS PIPE (1/2″ x 12″ NIPPLE)
$4.531/2″ x 12″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP3 – BLACK STEEL GAS PIPE (1/2″ x 3″ NIPPLE)
$2.051/2″ x 3″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP4 – BLACK STEEL GAS PIPE (1/2″ x 4″ NIPPLE)
$2.201/2″ x 4″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP6 – BLACK STEEL GAS PIPE (1/2″ x 6″ NIPPLE)
$2.361/2″ x 6″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP8 – BLACK STEEL GAS PIPE (1/2″ x 8″ NIPPLE)
$3.031/2″ x 8″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.
-
1/2BP90 – BLACK STEEL GAS PIPE (1/2″ ELBOW)
$1.981/2″ black steel 90-degree elbow. Female NPT threads on both ends. Black malleable iron. For directional changes in gas piping.
-
1/2BP90ST – BLACK STEEL GAS PIPE (1/2″ STREET ELBOW)
$2.441/2″ black steel 90-degree street elbow. Male x Female NPT threads. Saves space by screwing directly into a fitting without a nipple.
-
1/2BPCAP – BLACK STEEL GAS PIPE (1/2″ CAP)
$1.701/2″ black steel pipe cap. Female NPT thread. Seals the open end of a gas pipe run. Black malleable iron. For capping unused gas connections.
-
1/2BPCPL – BLACK STEEL GAS PIPE (1/2″ COUPLING)
$1.891/2″ black steel pipe coupling. Female NPT threads on both ends. Joins two pieces of pipe together. Black malleable iron.
-
1/2BPTEE – BLACK STEEL GAS PIPE (1/2″ TEE)
$2.431/2″ black steel pipe tee. Female NPT threads on all three ports. For branching gas lines to multiple appliances. Black malleable iron.
-
1/2C90 – REFRIGERATION COPPER FITTING (1/2″ 90° ELBOW, LONG RADIUS)
$2.761/2″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
1/2C90ST – REFRIGERATION COPPER FITTING (1/2″ 90° STREET ELBOW, LONG RADIUS)
$2.431/2″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
1/2CC – REFRIGERATION COPPER FITTING (1/2″ COUPLING WITH STOP)
$1.761/2″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 1/2″ copper pipe in a straight line. Wrot copper for brazing.
-
3/4C90 – REFRIGERATION COPPER FITTING (3/4″ 90° ELBOW, LONG RADIUS)
$3.843/4″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
3/4C90ST – REFRIGERATION COPPER FITTING (3/4″ 90° STREET ELBOW, LONG RADIUS)
$3.343/4″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
3/4CC – REFRIGERATION COPPER FITTING (3/4″ COUPLING WITH STOP)
$2.263/4″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 3/4″ copper pipe in a straight line. Wrot copper for brazing.
-
3/4PVC45 – PVC FITTING (3/4″, 45° ELBOW, SCH 40)
$1.313/4″ Schedule 40 PVC 45° elbow (slip x slip). Makes a gradual 45-degree turn in HVAC condensate drain lines. Better flow than a 90° elbow when space allows.
-
3/4PVC90 – PVC FITTING (3/4″, 90° ELBOW, SCH 40)
$0.853/4″ Schedule 40 PVC 90° elbow (slip x slip). Standard fitting for making right-angle turns in HVAC condensate drain lines. Glue-joint connections.
-
3/4PVCCAP – PVC PIPE (3/4″, CAP, SCH 40, SLIP FITTING)
$0.683/4″ Schedule 40 PVC slip cap. Glues onto the end of 3/4″ PVC pipe to seal it off. Used on drain line dead ends, test points, and unused connections.
-
3/4PVCCPL – PVC FITTING (3/4″, COUPLING, SCH 40)
$0.653/4″ Schedule 40 PVC coupling (slip x slip). Joins two pieces of 3/4″ PVC pipe end-to-end. Glue-joint connection for condensate drain line repairs and extensions.
-
3/4PVCFADAP – PVC PIPE – FEMALE ADAPTOR (SLIP x FPT, 3/4″)
$1.043/4″ Schedule 40 PVC female adapter (slip x FPT). Transitions from glue-joint PVC to a threaded fitting. Used on HVAC drain lines, drain pans, and cleanouts.
-
3/4PVCMADAP – PVC FITTING – NO GASKET/NUT (3/4″, THREADED MALE ADAPTOR, SCH 40)
$1.173/4″ Schedule 40 PVC male adapter (slip x MPT). Transitions from glue-joint PVC to a male threaded connection. No gasket or nut included — threaded end only.
-
3/4PVCSTICK – PVC PIPE (3/4″ x 10′, SCH 40)
$6.293/4″ x 10′ Schedule 40 PVC pipe. Standard for HVAC condensate drain lines. Glue-joint connections. Cut it to length on-site.
-
3/4PVCTEE – PVC FITTING (3/4″, TEE, SCH 40)
$1.243/4″ Schedule 40 PVC tee (slip x slip x slip). Creates a 90° branch connection in HVAC drain lines. Commonly used for cleanout access or splitting a drain run.
-
3/4PVCTRAP – PVC FITTING (3/4″, TRAP, SCH 40)
$2.823/4″ Schedule 40 PVC P-trap (slip x slip). Standard condensate drain trap for HVAC systems. Holds water to create an air seal and prevent air from blowing through the drain line.
-
3/8C90 – REFRIGERATION COPPER FITTING (3/8″ 90° ELBOW, LONG RADIUS)
$2.503/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
3/8C90ST – REFRIGERATION COPPER FITTING (3/8″ 90° STREET ELBOW, LONG RADIUS)
$2.603/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
3/8CC – REFRIGERATION COPPER FITTING (3/8″ COUPLING WITH STOP)
$1.723/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 3/8″ copper pipe in a straight line. Wrot copper for brazing.
-
5/8C90 – REFRIGERATION COPPER FITTING (5/8″ 90° ELBOW, LONG RADIUS)
$2.875/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
5/8C90ST – REFRIGERATION COPPER FITTING (5/8″ 90° STREET ELBOW, LONG RADIUS)
$2.615/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
5/8CC – REFRIGERATION COPPER FITTING (5/8″ COUPLING WITH STOP)
$2.005/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 5/8″ copper pipe in a straight line. Wrot copper for brazing.
-
6DH8X1/2R10 – SCREWS (QTY – 100, DRILL POINT, #8, 1/2″ LONG, 1/4″ HEX)
$10.85#8 x 1/2″ hex head drill point screws, 100-pack. Self-drilling with 1/4″ hex drive. No pre-drilling needed for sheet metal.
-
6DH8X1/2R50 – SCREWS (QTY – 500, DRILL POINT, #8, 1/2″ LONG, 1/4″ HEX)
$20.63#8 x 1/2″ hex head drill point screws, 500-pack. Self-drilling with 1/4″ hex drive. Bulk pack for contractors and big jobs.
-
6THW8X2R25 – SCREWS (QTY – 250, TAPER POINT, #8, 2″ LONG, 1/4″ WHITE HEX)
$23.84#8 x 2″ white hex head taper point screws, 250-pack. Self-piercing with 1/4″ white painted hex head. Used for registers and grilles.
-
6THW8X2R5 – SCREWS (QTY – 50, TAPER POINT, #8, 2″ LONG, 1/4″ WHITE HEX)
$11.22#8 x 2″ white hex head taper point screws, 50-pack. Self-piercing with 1/4″ white painted hex head. For registers and grilles.
-
6THZ8X1/2R10 – SCREWS (QTY – 100, TAPER POINT, #8, 1/2″ LONG, 1/4″ HEX)
$6.96#8 x 1/2″ zinc hex head taper point screws, 100-pack. Self-piercing with 1/4″ zinc-plated hex head for sheet metal work.
-
6THZ8X1/2R50 – SCREWS (QTY – 500, TAPER POINT, #8, 1/2″ LONG, 1/4″ HEX)
$15.84#8 x 1/2″ zinc hex head taper point screws, 500-pack. Self-piercing with 1/4″ zinc-plated hex head. Bulk pack for shops and contractors.
-
7/8C90 – REFRIGERATION COPPER FITTING (7/8″ 90° ELBOW, LONG RADIUS)
$4.097/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
-
7/8C90ST – REFRIGERATION COPPER FITTING (7/8″ 90° STREET ELBOW, LONG RADIUS)
$3.507/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
-
7/8CC – REFRIGERATION COPPER FITTING (7/8″ COUPLING WITH STOP)
$2.557/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 7/8″ copper pipe in a straight line. Wrot copper for brazing.
-
7NBC11 – CABLE ZIP TIE (11″, QTY – 100, BLACK)
$8.7211″ black cable zip ties, 50 lb tensile strength, UV-resistant nylon. Pack of 100. For bundling wires and securing components during HVAC installations.
-
CHIPBRUSH2 – DISPOSABLE CHIP BRUSH (2″ WIDE, SHORT)
$1.042″ disposable chip brush with natural bristles and wood handle. Use it to apply PVC glue, clean coils, brush away debris, or spread sealant. Single-use and cheap.
-
CIT3434 – COATED LINE INSULATION (3/4″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)
$16.38UV-coated pipe insulation, 3/4″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 3/4″ copper line.
-
CIT7834 – COATED LINE INSULATION (7/8″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)
$19.00UV-coated pipe insulation, 7/8″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 7/8″ copper line.
-
FLEXPRO – TAPE (1.89″ x 360′, PLASTIC TAPE)
$15.361.89″ x 360′ plastic HVAC tape. Pressure-sensitive adhesive. For wrapping flex duct connections and general HVAC bundling. Also called Tuck Tape.
