W51-MHCJA1-02 – CONDENSER MOTOR (1/3 – 1/4 – 1/5 HP, 1075 RPM, 10 MFD)
$142.691/3 to 1/5 HP condenser fan motor, 1075 RPM, 208-230V, 10 MFD cap. Multi-HP replacement for Goodman, Trane, Carrier, Lennox, and more.
Showing 1–48 of 250 results
-
-
W51-MHBDV-04 – BLOWER MOTOR – ECM X13 – CONSTANT TORQUE (1/2-1/3 HP, DUAL VOLTAGE)
$335.231/2 to 1/3 HP ECM X13 constant-torque blower motor, dual voltage 115/208-230V. Fits Goodman, Trane, Lennox, and more. Preprogrammed with installation harness.
-
W51-MHBAA4-03 – BLOWER MOTOR – FURNACE (3/4 HP, 120V, 15MFD)
$167.563/4 to 1/5 HP furnace blower motor, 115V, 1075 RPM, multi-speed reversible. Requires 15 MFD capacitor. Fits Trane, Carrier, and other 115V furnaces.
-
W51-34BJA3-02 – BLOWER MOTOR – AIR HANDLER (3/4 HP, 240V, 15MFD)
$159.403/4 HP air handler blower motor, 208-230V, 1075 RPM, 3-speed reversible. Requires 15 MFD capacitor. Replaces Lennox 19L40 and WG840590.
-
W51-34BDV-04 – BLOWER MOTOR – ECM X13 – CONSTANT TORQUE (3/4 HP, DUAL VOLTAGE)
$342.653/4 HP ECM X13 constant-torque blower motor, 115/208-230V dual voltage. Replaces multiple Goodman, Trane, and Lennox X13 motors. Preprogrammed with harness.
-
W51-16CJA1-02 – CONDENSER MOTOR (1/6 HP, 1075 RPM, 10MFD)
$129.721/6 HP 1075 RPM condenser fan motor, 208-230V, 10 MFD cap required. Direct replacement for WG840727. Fits multiple residential condenser brands.
-
W51-14CJJ1-02 – CONDENSER MOTOR (1/4 HP, 825 RPM, 48Y, 5MFD)
$147.661/4 HP 825 RPM condenser fan motor, 208-230V, 48Y frame, 5 MFD cap. Direct OEM replacement for Goodman, Lennox, and other brands.
-
W51-14BJA3-02 – BLOWER MOTOR – AIR HANDLER (1/4 HP, 240V, 10MFD)
$136.321/4 HP air handler blower motor, 208-230V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. The 230V version for air handlers that need a 1/4 HP motor.
-
W51-14BAA3-02 – BLOWER MOTOR – FURNACE (1/4 HP, 120V, 10MFD)
$135.341/4 HP furnace blower motor, 120V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. Budget-friendly option for smaller furnaces and air handlers.
-
W51-13BJA3-02 – BLOWER MOTOR – AIR HANDLER (1/3 HP, 240V, 10MFD)
$138.531/3 HP air handler blower motor, 208-230V, 3-speed, reversible rotation. Requires 10 MFD capacitor. Replaces Lennox 19L36 and multiple GE/Genteq motors.
-
W51-13BAA3-02 – BLOWER MOTOR – FURNACE (1/3 HP, 120V, 10MFD)
$140.561/3 HP furnace blower motor, 120V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. Fits Goodman, Trane, Lennox, Carrier, and other 115V furnaces.
-
W51-12BJA3-02 – BLOWER MOTOR – AIR HANDLER (1/2 HP, 240V, 10MFD)
$152.611/2 HP air handler blower motor, 208-230V, 3-speed, reversible rotation. Requires 10 MFD capacitor. Replaces Lennox 19L38 and D801205P01.
-
W51-11BDV-04 – BLOWER MOTOR – ECM X13 – CONSTANT TORQUE (1 HP, DUAL VOLTAGE)
$384.561 HP ECM X13 constant-torque blower motor, 115/208-230V dual voltage. Replaces multiple Goodman, Trane, and Lennox X13 motors. Preprogrammed with harness included.
-
326628-761 – INDUCER MOTOR ASSEMBLY (CARRIER, AFTERMARKET, DIRECT, P326628-761)
$229.44Aftermarket inducer motor assembly for Carrier furnaces. Two-speed, thermally protected. Replaces 326628-761 and multiple cross-references. Complete assembly by Packard (66761).
-
AE-61698-82 – SCREW SHELL MOTOR MOUNT KIT (4-ARM, RHEEM)
$38.18Rheem AE-61698-82 screw shell motor mount kit, 4-arm. OEM replacement for 48-frame blower motors in Rheem and Ruud furnaces and air handlers.
-
AE-58384-81- SCREW SHELL MOTOR MOUNT KIT (4 ARM, RHEEM)
$43.42Rheem AE-58384-81 screw shell motor mount kit, 4-arm. OEM replacement for mounting 48-frame blower motors in Rheem and Ruud furnaces and air handlers.
-
47-100436-05 – CONTROL BOARD – PSC MOTOR (RHEEM, AIR HANDLER)
$76.92Rheem 47-100436-05 control board for air handlers with PSC motors. OEM replacement for Rheem and Ruud air handlers. Manages blower motor speed and timing.
-
S1-024-42184-000 – DOUBLE SHAFT BLOWER MOTOR (1 HP, 115V, 1100 RPM, YORK)
$705.66York OEM 1 HP double-shaft blower motor. 115V, 1100 RPM, 4-speed. Direct fit for York furnaces and air handlers. Replaces F48E34A48 and S83-536.
-
M847D-ZONE – ZONE DAMPER MOTOR
$144.40Honeywell M847D-ZONE zone damper motor/actuator. 24VAC, spring-return. Fits ARD, EARD, and ZD series zone dampers. Direct-couples to 7/16″ damper shaft.
-
B1376857 – MOTOR ARMS (SET OF 3)
$27.75Goodman B1376857 motor mount arms, set of 3. OEM replacement for Goodman and Amana furnaces and air handlers. Secures the blower motor in the housing.
-
B1376851 – MOTOR BELLY BAND
$12.86Goodman B1376851 motor belly band. Wraps around the blower motor to hold it in place inside the blower housing. OEM Goodman/Amana part.
-
5K015 – MOTOR MODULE ADAPTOR (16 PIN to 4 PIN)
$23.18Motor module adapter — converts 16-pin connector to 4-pin for Genteq Evergreen VS or model 3.0 ECM motors. Required when replacing a GE 2.5 ECM with a newer Evergreen.
-
320887-751 – INDUCER MOTOR GASKET KIT (CARRIER)
$35.83Carrier OEM inducer motor gasket kit. Seals the inducer motor housing to prevent exhaust gas leaks. Use when replacing the inducer motor or if you smell exhaust fumes near the furnace.
-
ECMPRO – ECM MOTOR TESTER
$69.84Supco ECMPRO universal ECM motor tester. 24 VAC powered with 24-inch leads, magnetic case, and short circuit protection. Tests most ECM blower motors without the furnace board.
-
318984-753 – INDUCER MOTOR (CARRIER, AFTERMARKET, DIRECT, SM4753)
$95.50Aftermarket inducer motor for Carrier furnaces. 115V, 1/25 HP, 3300 RPM. Replaces 318984-753, HC21ZE114, HC21ZE117, and HC21ZE123. Fits a wide range of Carrier models.
-
S1-02435329000 – INDUCER MOTOR ASSEMBLY (YORK, AFTERMARKET, DIRECT, A228)
$265.32Aftermarket inducer motor assembly for York furnaces. 115V, 1/25 HP, 3000 RPM, CCW rotation. Replaces S1-02435329000. Complete Fasco A228 assembly.
-
FE6001F – CONDENSER MOTOR (1/3-1/6 HP, 2-SPD, 825 RPM) (TRANE MOUNT)
$246.801/3-1/6 HP 2-speed condenser motor, 825 RPM, 208-230V. Trane mounting configuration. Replaces Trane and other brand condenser fan motors.
-
EM3467 – BLOWER MOTOR – AIR HANDLER (3/4 HP, 240V, 10MFD)
$195.463/4 HP air handler blower motor, 208-230V, 1075 RPM, 4-speed reversible. Requires 10 MFD 370V capacitor (sold separately). The 230V version of the EM3466.
-
EM3466 – BLOWER MOTOR – FURNACE (3/4 HP, 120V, 10MFD)
$205.443/4 HP furnace blower motor, 115V, 1075 RPM, 4-speed reversible. Requires 10 MFD 370V capacitor (sold separately). Direct replacement for US Motors 55470.
-
D338 – DOUBLE SHAFT BLOWER MOTOR (1/6 HP, 1550 RPM, 4-SPD, 115V)
$226.58Fasco D338 double-shaft blower motor. 1/6 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount and auto overload protection. Fits fan coils and PTACs.
-
D337 – DOUBLE SHAFT BLOWER MOTOR (1/8 HP, 1550 RPM, 4-SPD, 115V, M5)
$235.34Fasco D337 double-shaft blower motor. 1/8 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount. Fits wall heaters, fan coils, and small units.
-
D258 – DOUBLE SHAFT BLOWER MOTOR (1/5-1/10 HP, 1550 RPM, 230V)
$189.72Fasco D258 double-shaft blower motor. 1/5 to 1/10 HP, 1550 RPM, 208-230V. 5-inch diameter with resilient ring mount, sleeve bearings, and auto overload protection.
-
9487 – MOTOR BUSHING (1/2″ SHAFT to 5/8″ BORE)
$7.861/2″ to 5/8″ motor shaft bushing. Adapts a 1/2″ motor shaft to fit a 5/8″ bore blower wheel or pulley. Steel with keyway slot.
-
BLW00889 – INDUCER MOTOR ASSEMBLY (TRANE, AFTERMARKET, DIRECT, FB-RFB337)
$168.50Aftermarket inducer motor assembly for Trane/American Standard furnaces. 115V, 3000 RPM, 1/50 HP. Replaces BLW00889. Complete assembly with motor, wheel, housing, and gaskets.
-
B1859005 – INDUCER MOTOR (GOODMAN, AFTERMARKET DIRECT, FB-RFB859)
$155.12Aftermarket inducer motor for Goodman furnaces. 115V, 3000 RPM, 1/40 HP. Replaces B1859005. Complete assembly with motor, wheel, housing, and gasket.
-
85L49 – INDUCER MOTOR (LENNOX, AFTERMARKET, DIRECT, FB-RFB401)
$164.12Aftermarket inducer motor for Lennox furnaces. 120V, 3000 RPM, 1/60 HP. Replaces 85L49. Complete assembly with motor, wheel, housing, and gaskets.
-
70-24157-03 – INDUCER MOTOR (RHEEM, AFTERMARKET, DIRECT, FB-RFB241)
$178.04Aftermarket inducer motor for Rheem/Ruud furnaces. 120V, 3000 RPM, 1/30 HP. Replaces 70-24157-03. Right-side discharge. Complete assembly.
-
5860 – BLOWER MOTOR – UNIVERSAL ECM (2.0, 2.3, EON, 16PIN, DUAL VOLTAGE)
$564.991-1/3 HP universal ECM blower motor by U.S. Motors. 115/230V dual voltage, 1075 RPM. Replaces 16-pin variable speed models including EON and Nidec ECMs.
-
1013833 – INDUCER MOTOR ASSEMBLY (ICP, AFTERMARKET, DIRECT, FB-RFB383)
$150.70Aftermarket inducer motor assembly for ICP/Heil/Tempstar furnaces. 115V, 1.6A. Replaces 1013833. Complete assembly with motor, housing, and wheel.
